Engineer, RF Resume Sample
Joesph Zboncak
62138 Pierre Skyway,
Dallas,
TX
+1 (555) 243 3276
Work Experience
Principal Engineer RF System Crosstalk
12/2016
-
PRESENT
Boston, MA
- Experience working with cross-functional teams to define ATE characterization test plans, coordinating data collection and performing data analysis across PVT
- Direct experience with yield management in high volume manufacturing
- This is an office-based position in a manufacturing facility.
- Verification for Bluetooth baseband, include BLE, BT5.0
- SoC platform verification with AMBA interconnect and ARM CPUs
- Build up test bench and simulation environment
- Be able to write test plan according to design
RF Field Engineer
05/2013
-
09/2016
Houston, TX
- Performing technical analysis/feasibility for new product specifications, evaluate customer specifications and support cost/technical proposal generation
- Experience in the following is required: - RF/Analog IC layouts - High frequency circuits such as LNAs, PAs, VCOs, PLLs, ADCs and DACs - Experience with deep sub-micron CMOS designs - Cadence Virtuoso and Mentor Graphics Calibre tools
- Thorough understanding of wide arrays of RF/Wireless infrastructure Timing products such as converter clocks (RF-PLLs), RF VCOs and Synthesizers, JESD204B clock generators and RF Buffers
- Preferable understanding of wireless base station radio card topologies, signal chain and system requirements
- Preferable understanding of RF theory, RF mixer, DAC/ADC and amplifiers
- Good understanding of noise budget, spurious attenuation, harmonics and converter clocking theory and converter specifications
- Hands-on experience with engineering lab equipment and test techniques required for RF/Wireless Timing products such as high speed oscilloscopes, TIA’s, network analyzers, clock generators, Phase noise analyzer, Spectrum Analyzers and Signal sources
Entry Level RF Power Amplifier Engineer
11/2007
-
11/2012
Detroit, MI
- Effectively applies RF principles to performance activities. Serves as subject matter expert on OTE/VOLTE/GSM/GPRS/EDGE/UMTS and emerging technology theory
- Supports engineering and technical staff. Provides engineering support to Sales/Customers by responding to customer and employee network related complaints. Provides input to management on tactical and strategic issues. Acts as developer and resource for market, regional, and national planning and performance tools (as applicable)
- Experience with technical writing skills to document test requirements and prepare concise technical reports
- Experience with problems involving several concrete variables in standardized situations
- Two (2) years experience in designing, testing and troubleshooting RF/Microwave components
- Experience with reading schematics and working knowledge of electronics including power and RF/Microwave
- A valid Washington driver’s license
Education
Kettering University
2001 - 2006
Engineer's Degree in Electrical Engineering
Professional Skills
- Strong experience in RF MEMS device design, manufacturing, and testing
- If the candidates have some antenna design related experience and/or phase array antenna design experience from military, that’s good too
- Working experience with mechanical, software, hardware, DFM, manufacturing engineering disciplines
- Experience within the wireless industry troubleshooting, optimizing, and designing wireless communication sites
- Solid experience in RF front-end module design, manufacturing, and testing
- Experience with the engineering change proposal processes
- Hands on experience in antenna design, simulation and knowledge on testing
How to write Engineer, RF Resume
Engineer, RF role is responsible for design, troubleshooting, travel, wireless, architecture, training, integration, security, telecommunications, reporting.
To write great resume for engineer, rf job, your resume must include:
- Your contact information
- Work experience
- Education
- Skill listing
Contact Information For Engineer, RF Resume
The section contact information is important in your engineer, rf resume. The recruiter has to be able to contact you ASAP if they like to offer you the job. This is why you need to provide your:
- First and last name
- Telephone number
Work Experience in Your Engineer, RF Resume
The section work experience is an essential part of your engineer, rf resume. It’s the one thing the recruiter really cares about and pays the most attention to.
This section, however, is not just a list of your previous engineer, rf responsibilities. It's meant to present you as a wholesome candidate by showcasing your relevant accomplishments and should be tailored specifically to the particular engineer, rf position you're applying to.
The work experience section should be the detailed summary of your latest 3 or 4 positions.
Representative Engineer, RF resume experience can include:
- Understanding of transistor-level analog circuit design and of IC semiconductor fabrication processes is strongly recommended
- Holding patents would be good to have criteria
- Demonstrate knowledge of IP v4 and IPv6 networking, ability to configure modems/ routers, in addition to simple firewall policies/Access Lists
- Passive/Active Antenna/System Testing Experience
- Demonstrated abilities with EM simulation techniques and tool including MoM EM solvers and HFSS
- Experience with circuit design and layout using Cadence tools and Agilent ADS
Education on an Engineer, RF Resume
Make sure to make education a priority on your engineer, rf resume. If you’ve been working for a few years and have a few solid positions to show, put your education after your engineer, rf experience. For example, if you have a Ph.D in Neuroscience and a Master's in the same sphere, just list your Ph.D. Besides the doctorate, Master’s degrees go next, followed by Bachelor’s and finally, Associate’s degree.
Additional details to include:
- School you graduated from
- Major/ minor
- Year of graduation
- Location of school
These are the four additional pieces of information you should mention when listing your education on your resume.
Professional Skills in Engineer, RF Resume
When listing skills on your engineer, rf resume, remember always to be honest about your level of ability. Include the Skills section after experience.
Present the most important skills in your resume, there's a list of typical engineer, rf skills:
- Effective communication skills, flexibility, a strong teamwork approach, and the desire to work in a fast-paced aggressive environment are necessary
- Excellent verbal, written, interpersonal and customer skills. Fluency in English
- Strong presentation, demonstration, and project management skills
- Completely literate with all Microsoft applications and general computer skills
- Staff Level; 3-6+ of experience in software and system development role and/or work experience in RF, semiconductor, instrumentation, or chipset business
- Senior Level; 7+ of experience in software and system development role and/or work experience in RF, semiconductor, instrumentation, or chipset business
List of Typical Experience For an Engineer, RF Resume
1
Experience For RF Field Engineer Resume
- L-band HPA’s (High Power Amplifiers)
- Ku-band, Rx/Tx, Measurements and Development work
- GPS, Glonass and Beidou among others
- Systemdesign – air interface – and Rx/Tx chain calculations
- Assistance on RF level in the type approval phase
- Yield analysis by use of statistic sw tool can occur
- Responsible for the design, development, evaluation and analysis, applying radio frequency engineering principles for wireless communications components, products or systems
2
Experience For RF DVT Engineer Resume
- Performs antenna level design, testing and preparation of production drawing package. Develops and executes product in-process and final testing and integration plans for new or updated products. Test/evaluate competing products and technologies
- Prepare part specifications. Researches and evaluates potential vendors and makes recommendations as to the final vendor selection. Work closely with our R&D centers in US, Australia, China, and India
- Strong organizational, project management and customer interface skills
- Experience with developing circuits in baseband and L-band
- Experience with EMC measurements
- Knowledge of developing circuits within Ku –and Ka-band
- Antenna Range testing
- Field failure analyses
- RF Hardware Knowledge,
List of Typical Skills For an Engineer, RF Resume
1
Skills For RF Field Engineer Resume
- Passionate self-starter and team player with experience in project leadership and multi-tasking
- Engineering design experience
- Interact with internal stakeholders and the client’s customer base to solidify the client as well as the customer’s business needs are being met
- Direct experience of base station antenna design
- Fabricate and tune, and characterize power amplifier circuits to provide validation of high efficiency concept
- Experience in project management to drive product development with external supplier and manufacturer
2
Skills For RF DVT Engineer Resume
- Experience in Microsoft Excel spreadsheets
- Developing tests for, and supporting production screening and reliability check
- Testing, characterization, debugging and optimization of WLAN RF circuits
- Confirming RF performance by running system-level tests
- Working with NPI and operations to move product from development to volume
- Qualifying measurements on BUC’s (Block Up Converters) and LNB’s (Low Noise Block converters) for the Ku –and Ka-band
3
Skills For RF Development Engineer Resume
- Qualifying measurements on LNA’s (Low Noise Amplifiers) and HPA’s for the L-band
- Working knowledge of conducted and radiated measurement methods
- A technical understanding of one or more of the following radio technologies: cellular communication, WiFi, Bluetooth and GPS
- Overall planning and execution of all client deployment projects employing generally accepted client process
- RF test equipment and automated testing
- Provide RF / analog engineering effort estimates in support of bid and proposal efforts as required
- Provide technical engineering input/support as required
- Simulate and design RF power amplifier circuits using latest generation LDMOS and GaN power transistor technologies and high efficiency circuit concepts
4
Skills For RF Plasma Engineer Resume
- Deep understanding RF front-end design for mobile communication
- Broad knowledge of semiconductor processing, device fabrication, electromagnetic field, microwave, and wireless communication
- Track record of working with engineers in remote and international locations
- Knowledge of RF Circuit Design and Signal processing techniques
- Use EM tools to predict circuit level electric and magnetic coupling
- BSEE or higher in Electrical Engineering
- Operations and maintenance scheduling, customer interface, sub-contractors, network deployment, optimization, and customer acceptance
- Support product transfers between manufacturing plants
- Product training to interested groups
5
Skills For RF Solutions Engineer Resume
- Assistance during build-up -and test of antenna systems in R&D towards type approval preparation
- Responsible for Antenna CAD/simulations (i.e., CST/HFSS, ADS, AWR etc.) – Matching networks, Antenna Geometry
- Antenna System characterization, optimization and debugging
- Near and Far Field Antenna Radiation pattern testing
- Work close with designer for engineering parts assembly and test at the beginning of design. Include selecting assembly material , modifying the bonding diagram to meet design rule. Communicate with manufacture to fix assembly issue during the build
- Collect stress test data for mature design review once design frozen
- Duplicate and tune fixtures for production handover
6
Skills For RF & Electromagnetics Engineer Resume
- Take lead of converting NPI from mature design to production. Include NPI qualification run, assembly data inspection, test data analysis , production specification setup, reliability coordinator . standardized the documents for production
- Design & Development of RF communications systems, equipment and related products
- Work closely with software and hardware engineers
- Support new product development reviews as required
- Assume technical and documentation responsibility for project assignments
- Knowledge of BT, WLAN, MoCA, ISM among others
- Knowledge of Oscillators, PLL’s, Mixers, LNA’s, Gainblocks, Attenuators, Phaseshifters, Filters (i.e. SAW, LTCC, Microstrip etc.), FET’s and Power FET’s
- Experience in the design and simulation of RF passive components such as inductors, transformers, MOM capacitors and passive filters
7
Skills For Principal Engineer RF System Crosstalk Resume
- ASIC design, verification, or related work experience
- Develop topic for and conduct routine meetings with the client to help solidify project versus actual field performance
- Proven flexibility – ability to deal with ambiguity, take and manage risks, learn quickly and adapt
- Demonstrated ability to determine key technical issues and develop appropriate corrective plan of action
- Experienced in the use of spectrum analyzers, signal generators, RF filters, watt-meters, multi-meters and other standard test equipment types
- Knowledge of Power Supply and Digital HW
- Eager to learn about system component of a VSAT / BGAN antenna
8
Skills For Rf-itv, Field Service Engineer Resume
- Compact RLCK Model extraction of multiport passive components
- Experience with typical digital and analog aggressor sub-systems deployed in consumer electronic products along with knowledge of techniques for debugging to reduce their impact on radio receivers
- Willingness to travel to overseas manufacturing facilities to support builds from prototype phase to mass production
- Review and improve RF, digital and analog submodule flexible and rigid PCBs, IC packages and substrate designs
- Hands on knowledge of general purpose RF test equipment and communication analyzers
- Familiarity with EMI/EMC and RF circuit design
- Flexibility to work in a dynamic and fast paced work environment
- Dynamic and motivated with a “can do” attitude, to work in a great team on world class products
9
Skills For RF Desense Engineer Resume
- A willingness to travel up to 80% of the time is required
- Work together with all levels of the customer organization, supervise the client’s on-site personnel and coordinate the activities of corporate, sub-contractors and customer personnel assigned to the project
- Schedule and conduct periodic reviews and impose schedule maintenance and operational test to ensure system performance
- Customer oriented and a passion to focus and drive for closure on customer issues
- Self-starter and proactive team member
- Review/ interpret propagation studies and execute the installation per the design
10
Skills For RF Power Amplifier Engineer Resume
- Familiarity with Linux/Unix, JavaScript Object Notation (JSON) and MS Windows
- Work under pressure and provide high quality solutions to technical challenges
- Work independently as well as function as a project team member
- Product HW maintenance responsibility through product lifecycle
- Product HW responsibility transfers from R&D to PE
- Participate project(s) in his/her responsibility area
- Baseband, L-band and higher Intermediate Frequency, Rx/Tx, RF small signal measurements and development work
Related to Engineer, RF Resume Samples
Engineer, Control Resume Sample
Work Experience
• Review Owner’s Manual and Service Information related to the Applicable Subsystem
• Lead and participate in subsystem DFMEAs
• Automotive or engineering experience
• Prepare job-planning documents that define the control system scope of the outage
...
Professional Skills
• Strong programming experience with SCADA O...
• 3-5 +years experience in automation and or...
• Experience working with international cont...
Engineer, Controls Resume Sample
Work Experience
• Working knowledge of and testing techniques
• Experience in Automotive components and systems
• Drive projects in support of business, safety, and operational objectives
• Oversee the installation of major capital equipment projects for the end using or...
Professional Skills
• Excellent communication skills (both verba...
• Strong hands-on testing and troubleshootin...
• Demonstrated technical aptitude, problem s...
Engineer, Operating Resume Sample
Work Experience
• Troubleshooting Ability to ID problems and understand resources, needed to resolve them
• Lifting parts and tools weighing on average 20 pounds, occasionally weighing up to 80 pounds
• Maintain a log in which various aspects of the system’s operation are recorded, e.g., run t...
Professional Skills
• Position operates various commercial/indus...
• Position takes log readings, monitors and ...
• Proven analytical troubleshooting and prob...
Engineer Electromechanical Resume Sample
Work Experience
• · Background in Electro-mechanical design is an asset
• · Electro-mechanical design and product development is an asset
• · Basic understanding of railway Rolling Stock both theoretical and practical
• Develop product drawings and models. Manage the mod...
Professional Skills
• Independent working ability; strong initia...
• Computer skills: e.g. .net programming skills
• Strong technical problem solving skills (i...
Assistant Director Engineering Resume Sample
Work Experience
• Stationary Engineer’s license if required by local code
• The worker is subject to noise: there is sufficient noise to cause the worker to shout in order to be heard above the surrounding noise level
• The worker is subject to vibration: exposure to oscillating movements of t...
Professional Skills
• Excellent customer service skills with gre...
• Demonstrate strong leadership, good interp...
• Demonstrated skills in effective budget an...
Engineer Service Resume Sample
Work Experience
• Install, configure, and upgrade nodes in high availability customer production clusters
• Build long lasting, effective partnerships across the organization to foster collaboration between Product, Engineering and Operations teams
• Organize and manage multiple simultaneous p...
Professional Skills
• IT experience in an IAAS / PAAS environmen...
• Previous experience with Network Administr...
• Very good verbal and written communication...