Engineer, Control Resume Sample

8 votes
Resume Create

The Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Reinhold Lubowitz
52142 Williamson Fords,  Boston,  MA
+1 (555) 397 4205

Work Experience

Engineer VI Principal Protection & Control
10/2017 - PRESENT
Dallas, TX
  • Review Owner’s Manual and Service Information related to the Applicable Subsystem
  • Lead and participate in subsystem DFMEAs
  • Automotive or engineering experience
  • Prepare job-planning documents that define the control system scope of the outage
  • Configuration of IPC’s for completion of: IP Addresses and Host Names, Business Partner Access, IPC’s Imaging, Inventory, Backing up and Restoring, IT Security, Domain Integration, Manufacturing Systems (MMS, SFI, MCAT, FFDACS, etc.), Central Recipe Management and Energy Monitoring
  • Ensure compliance with the electrical standards set by Central Engineering (MES / C&D) for IPC’s, PLC’s, Drives, Machines Interfaces, Controls, etc
  • Provide Technical Support in terms of hardware (IPC’s, PLC's, Drives Systems, etc.) and software (Control Settings, High Level Programming, etc.) is concerned according with the Internal Escalation Organization
  • Many opportunities to contribute to Open Source projects such as Git, Git LFS, Jenkins, and others. Examples
Emachine Control Development Engineer
12/2012 - 07/2017
New York, NY
  • Propose design modifications to meet design functional requirements
  • Prepare design documents and drawings per AECL procedures, CNSC Regulatory Documents, ASME and CSA codes and standards
  • Identify design deficiencies and propose solutions
  • Review design documents and drawings in support of design verification
  • Interface with interfacing systems designers and analysts to obtain the technical information and resolve issues relevant to the detail designs
  • Perform other design work or provide technical support on as required basis within the reactivity mechanism section’s area of responsibility
  • Perform conceptual and detail design engineering work on the Reactivity Control Units and components to applicable codes, standards and procedures. The design activities include, but are not limited to the preparation of design documents, technical reports and technical calculations
  • Define work scope, prepare responses to technical questions, communicate client and SNC-Lavalin requirements, monitor and report progress
Engineer, Control System
02/2008 - 11/2012
Phoenix, AZ
  • Specify design and requirements
  • Specify testing and procurement requirements
  • Prepare small-scope engineering budgets and proposals
  • Coaches, mentors and guides other Engineering Professionals
  • Assists Maintenance Area Leader in the management of the Area Maintenance department
  • Ensures a proper diagnostic of electrical problems, repair and restart of production machineries of the area of responsibility in case of breakdowns. Manage C&D equipment’s spare part in cooperation with Purchasing Department
  • Ensures the implementation of the local Maintenance strategy (focusing on Maintain ME and including SAP PM, interfaces with other departments


Kettering University
2003 - 2008
Engineer's Degree in Electrical Engineering

Professional Skills

  • Strong programming experience with SCADA OR HMI
  • 3-5 +years experience in automation and or control and drives in design or manufacturing environment
  • Experience working with international contacts through projects, colleagues or suppliers
  • Experience with integrating other Honeywell/Intelligrated and third-party systems
  • Experience with Allen Bradley, Siemens and or Beckhoff control and drives
  • Experience in machine improvement, refurbishment, upgrade or installation projects
  • Experience with Siemens and or Allen Bradley PLCs

How to write Engineer, Control Resume

Engineer, Control role is responsible for government, software, procurement, purchasing, manufacturing, design, research, modeling, travel, automation.
To write great resume for engineer, control job, your resume must include:

  • Your contact information
  • Work experience
  • Education
  • Skill listing

Contact Information For Engineer, Control Resume

The section contact information is important in your engineer, control resume. The recruiter has to be able to contact you ASAP if they like to offer you the job. This is why you need to provide your:

  • First and last name
  • Email
  • Telephone number

Work Experience in Your Engineer, Control Resume

The section work experience is an essential part of your engineer, control resume. It’s the one thing the recruiter really cares about and pays the most attention to.
This section, however, is not just a list of your previous engineer, control responsibilities. It's meant to present you as a wholesome candidate by showcasing your relevant accomplishments and should be tailored specifically to the particular engineer, control position you're applying to. The work experience section should be the detailed summary of your latest 3 or 4 positions.

Representative Engineer, Control resume experience can include:

  • Ensures Environment, Safety and Health requirement fulfillment in the area of responsibility. Informs and insures involvement of area Maintenance employees on ESH issues
  • Identifies, analyses and insures the implementation of potential Controls & Drives improvements (including costs savings, downtime and scrap reduction) on area production machineries in cooperation with other departments (Production, Quality, and Purchasing)
  • Maintains professional and technical C&D knowledge by attending educational workshops; reviewing professional publications; establishing personal networks. Train and participate to the evaluation of electricians in the area
  • Solid knowledge of FADEC System requirements verification is an advantage
  • Ideally knowledge in ADA and Python programming language as well as Software Development according to DO-178 and System Development according to ARP4754 Rev.A
  • Support of engine testing on test beds with regards to the FADEC System functionality (willing to travel op to 3 months per year)

Education on an Engineer, Control Resume

Make sure to make education a priority on your engineer, control resume. If you’ve been working for a few years and have a few solid positions to show, put your education after your engineer, control experience. For example, if you have a Ph.D in Neuroscience and a Master's in the same sphere, just list your Ph.D. Besides the doctorate, Master’s degrees go next, followed by Bachelor’s and finally, Associate’s degree.

Additional details to include:

  • School you graduated from
  • Major/ minor
  • Year of graduation
  • Location of school

These are the four additional pieces of information you should mention when listing your education on your resume.

Professional Skills in Engineer, Control Resume

When listing skills on your engineer, control resume, remember always to be honest about your level of ability. Include the Skills section after experience.

Present the most important skills in your resume, there's a list of typical engineer, control skills:

  • Proven experience in a technical field, preferably food manufacturing with TPM experience
  • Solid knowledge of Unix and Linux, python programming language , oracle data bases
  • C&D experience in manufacturing industry
  • Working knowledge of industry standards for documentation, basic and complex regulatory control, loop tuning, safety systems, and PLC configuration is required
  • Preferably knowledge in software development according to DO-178 and System Development according to ARP4754 Rev.A
  • Creates PLC Base Code test plans for all new R & D Code development efforts for In-House, Site, Commissioning, and Acceptance testing

List of Typical Skills For an Engineer, Control Resume


Skills For Engineer VI Principal Protection & Control Resume

  • Good skill in MS Office Suite
  • Able to drive strong business case with key stakeholders and create new commercial applications for Eaton
  • Experience in control technology development for hydraulics applications
  • Configuration experience in various HMI and PLC platforms is required
  • Experience with development of applications in Wonderware Intouch HMI and Allen Bradley Control Logix PLCs is required
  • Data management of test data in Unix/Linux, Write optimize scripts for data handling (Python etc.)
  • Provide customer facing support for Contrail controller
  • Improve code quality by following industry standard development methodology
  • Patience, understanding and non-confrontational approach for difficult customers

Skills For Emachine Control Development Engineer Resume

  • Proficient in technical drawing interpretation
  • Availability to work on-site (50% of the time traveling inside/outside Mexico)
  • Cooperation with staff both within TBS and other broadcast operations
  • Ensure all necessary quality assurance and quality control (QA/QC) inspections of field installations are performed to ensure the project’s compliance to applicable codes and standards including any Suncor specific practices or identified requirements
  • Work on Control System Design and verification tasks
  • Preferably knowledge of FADEC System requirements verification

Skills For Control Project Engineer Resume

  • Produces functional and conceptual technical design specifications and provides technical leadership, support and expertise for assigned projects
  • Develop and debug SDN control plane software based on BGP/L3VPN standards
  • Participate in architecture and design to come up with innovative solutions to solve customer's real world use case
  • Balance objectives and resolve conflicts
  • Willingness and ability to travel xx% of the time
  • Travel up to 25% domestically and be on call 24/7 as needed

Skills For Engineer, Control System Resume

  • Work in an intercultural environment and matrix organization
  • Advanced iAllen Bradley and Siemens PLC knowledge
  • Proficient in the use of profibus (protocol) and ethernet
  • Understands the importance of health and safety aspects to be able to manage projects properly
  • Proficient in model-based control system development using tools such as Matlab/Simulink, AMESim, and real-time control systems in both hardware-in-the-loop simulation and prototype systems
  • Maintain updated electrical and C&D documentation in the area (electrical plants, troubleshooting guides, etc

Skills For Control System Lead Engineer Resume

  • Expertise in control technology development such as motion compensation, adaptive controls and model-predictive power management
  • Domain knowledge in hydraulics technologies (such as propel/work circuit controls, motion compensation, intelligent hydraulic components, MOEM, and off-highway vehicles)
  • Experience in hydraulics control technology development, performing dynamic systems modeling and analysis, performing technology research and development from concept to implementation
  • Experience in the following areas: Hydraulics component/system; Hydraulics powertrain management solutions; advanced control and analytics; intelligent system; embedded systems
  • Experience in writing government proposals
  • Electrical qualifications in line with UK standards

Skills For Cost Control / Estimator Engineer Resume

  • In-depth knowledge of Siemens S7 ,Simatic Manager, HMI PC based applications and vision systems
  • Protection, Creation of Backups and Maintenance of control system software, such as IPC's, PLC's, Drives, Communication Devices, etc
  • Administer databases (Oracle)
  • Conducts project detailed designs aligned with our customer requirements and Mortenson’s best practice standards
  • Familiar with SAP/ORACLE
  • Leads the development and documentation of standard PLC Base Code design logic: i.e., development of standard logic subroutines, AOI’s, and UDT’s for frequently implemented applications; documents PLC logic standards using the application guide formant; working with all levels of PLC Controls Engineers to help resolve logic issues and roll logic improvements into the standards

Related to Engineer, Control Resume Samples

Engineer, Control Systems Resume Sample

Work Experience

  •  Work practically in the lab environment (‘hand on’) as well as to apply a scientific approach   •  Write technical documentation and algorithms’ specs for transfer purposes towards Product Development (Global Technology Departments and Labs)   •  Extensive knowledge about PLC syste...
Professional Skills

  •  Analytical/Interpersonal Skills: Demonstra...
  •  Demonstrated technical and professional sk...
  •  Highly motivated with strong communication...
17 votes

Engineer, Controls Resume Sample

Work Experience

  •  Working knowledge of and testing techniques   •  Experience in Automotive components and systems   •  Drive projects in support of business, safety, and operational objectives   •  Oversee the installation of major capital equipment projects for the end using or...
Professional Skills

  •  Excellent communication skills (both verba...
  •  Strong hands-on testing and troubleshootin...
  •  Demonstrated technical aptitude, problem s...
18 votes

Engineer, Operating Resume Sample

Work Experience

  •  Troubleshooting Ability to ID problems and understand resources, needed to resolve them   •  Lifting parts and tools weighing on average 20 pounds, occasionally weighing up to 80 pounds   •  Maintain a log in which various aspects of the system’s operation are recorded, e.g., run t...
Professional Skills

  •  Position operates various commercial/indus...
  •  Position takes log readings, monitors and ...
  •  Proven analytical troubleshooting and prob...
14 votes

Engineer Electromechanical Resume Sample

Work Experience

  •  · Background in Electro-mechanical design is an asset   •  · Electro-mechanical design and product development is an asset   •  · Basic understanding of railway Rolling Stock both theoretical and practical   •  Develop product drawings and models. Manage the mod...
Professional Skills

  •  Independent working ability; strong initia...
  •  Computer skills: e.g. .net programming skills
  •  Strong technical problem solving skills (i...
19 votes

Assistant Director Engineering Resume Sample

Work Experience

  •  Stationary Engineer’s license if required by local code   •  The worker is subject to noise: there is sufficient noise to cause the worker to shout in order to be heard above the surrounding noise level   •  The worker is subject to vibration: exposure to oscillating movements of t...
Professional Skills

  •  Excellent customer service skills with gre...
  •  Demonstrate strong leadership, good interp...
  •  Demonstrated skills in effective budget an...
11 votes

Engineer Service Resume Sample

Work Experience

  •  Install, configure, and upgrade nodes in high availability customer production clusters   •  Build long lasting, effective partnerships across the organization to foster collaboration between Product, Engineering and Operations teams   •  Organize and manage multiple simultaneous p...
Professional Skills

  •  IT experience in an IAAS / PAAS environmen...
  •  Previous experience with Network Administr...
  •  Very good verbal and written communication...
23 votes
Resume Builder

Create a Resume in Minutes with Professional Resume Templates