Stress Engineer Resume Sample

13 votes
Resume Create

The Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Jasmin Lebsack
98774 Caesar Radial,  Los Angeles, CA
+1 (555) 390 1045

Work Experience

Senior Stress Engineer
07/2015 - PRESENT
Phoenix, AZ
  • Current driver’s license, car registration and auto insurance required
  • Lead a group of DTA / fatigue stress engineers
  • Support DADTT test article
  • Bring your expertise to junior engineers
  • Prepare and/or check certification reports and support entry-into-service
  • Typical Experience less than 3 years
  • Experience with FEMAP/NX Nastran or Patran/MSC Nastran
  • Rapidly work with minimal supervision on projects involving both small and large engineering teams
  • Previous experience and skills in project definition, simulation, implementation, lab integration and test
Stress Engineer
02/2008 - 02/2015
Chicago, IL
  • Perform and check pipe stress calculations
  • Assist in identification of critical lines requiring pipe stress analysis, review line list to ensure adequate level of criticality is defined
  • Shall have experience in performing stress analysis for various systems such as: Fired Heater piping, Air cooler piping, pump piping, large storage tank piping, FRP piping, PSV piping, underground piping, high temperature piping, low temperature cryogenic piping, etc
  • Select springs/struts/snubbers when necessary, determine movements/loads, prepare spring/strut/snubber schedule, requisitions, and review related vendor drawings
  • Perform reinforcement evaluation at pipe supports and branch connections
  • Ensure compliance with various ASME and API codes and standards
  • Perform FEA evaluation for evaluation of stresses at nozzles, or for determining user calculated SIFs, using NozzlePro, FE/Pipe or other FEA software
  • Review client technical specifications related to piping flexibility analysis, piping components, fabrication, testing, and NDE, etc. and ensure compliance with the same
Junior Stress Engineer M/F
12/2001 - 11/2007
Chicago, IL
  • Research all relevant technical specifications, aircraft configurations and data to understand the loading environment and structural requirements and advise design engineering
  • Responsible for stress analysis, detail part sizing, and strength verification of primary and secondary aircraft structure, interior furnishings, and test articles using classical hand analysis methods and by interpreting results from finite element analysis and other means
  • Coordinate with design engineering during design phase and review production drawings to ensure compliance with structural requirements
  • Coordinate with design engineering during design phase to ensure all necessary structural input to support drawing release
  • Generate formal weight estimates/reports, vibration analysis, stress reports, test plans, and finite element models
  • Review nonconformance reports to validate repair schemes
  • Provide accurate task completion reports
  • Promote and support 6s, Kaizen, and other sponsored Lean activities
  • Participate and contribute to 6s and Lean activities


Clark University
1997 - 2001
Engineer's Degree in Engineering

Professional Skills

  • Experience in guiding and leading a team with strong business acumen & prior experience in work scope reduction
  • Strong Multi-tasking, problem-solving and critical thinking skills
  • Good IT skills and proficient in the use of Microsoft Office. Matlab or Mathcad experience for data manipulation is desirable
  • Experience and knowledge to effectively communicate issues and ideas effectively
  • Strong verbal and writing skills, including the ability to quickly prepare detailed written reports
  • Building, leading and developing a team of Stress Engineers with an appropriate mix of skills to deliver the engineering (Stress) solution
  • Analytical thinking, Initiative and creativity in solving engineering problems and good communication skills

How to write Stress Engineer Resume

Stress Engineer role is responsible for engineering, integration, english, aerospace, research, credit, training, procurement, security, reporting.
To write great resume for stress engineer job, your resume must include:

  • Your contact information
  • Work experience
  • Education
  • Skill listing

Contact Information For Stress Engineer Resume

The section contact information is important in your stress engineer resume. The recruiter has to be able to contact you ASAP if they like to offer you the job. This is why you need to provide your:

  • First and last name
  • Email
  • Telephone number

Work Experience in Your Stress Engineer Resume

The section work experience is an essential part of your stress engineer resume. It’s the one thing the recruiter really cares about and pays the most attention to.
This section, however, is not just a list of your previous stress engineer responsibilities. It's meant to present you as a wholesome candidate by showcasing your relevant accomplishments and should be tailored specifically to the particular stress engineer position you're applying to. The work experience section should be the detailed summary of your latest 3 or 4 positions.

Representative Stress Engineer resume experience can include:

  • Good team working skills, pro-active attitude, systematic and independent work. Share own experiences with others
  • Displays strong communication and interpersonal skills and has the ability to work in a fast-paced team environment with multiple deadline
  • Excellent technical, conceptual, and financial skills required
  • Three (3) years related experience and/or training; or equivalent combination of education and experience
  • Familiarity with Microsoft Office tools including Word and Excel. Strong Experience with Visual Basic and Matlab development
  • Strong experience in aircraft structural design is required, including composites

Education on a Stress Engineer Resume

Make sure to make education a priority on your stress engineer resume. If you’ve been working for a few years and have a few solid positions to show, put your education after your stress engineer experience. For example, if you have a Ph.D in Neuroscience and a Master's in the same sphere, just list your Ph.D. Besides the doctorate, Master’s degrees go next, followed by Bachelor’s and finally, Associate’s degree.

Additional details to include:

  • School you graduated from
  • Major/ minor
  • Year of graduation
  • Location of school

These are the four additional pieces of information you should mention when listing your education on your resume.

Professional Skills in Stress Engineer Resume

When listing skills on your stress engineer resume, remember always to be honest about your level of ability. Include the Skills section after experience.

Present the most important skills in your resume, there's a list of typical stress engineer skills:

  • Effectively manages multiple and conflicting priorities
  • Strong communication, time-management, and problem-solving skills
  • Good communications skills and the ability to interface with other disciplines
  • Knowledge of 3D solid modeling (CATIA, v5, Solidworks, Unigraphics)
  • Five (5) years related experience and/or training; or equivalent combination of education and experience
  • Related work experience in the Oil & Gas industry, specifically Pipe Stress/Pipe Support engineering and design experience

List of Typical Experience For a Stress Engineer Resume


Experience For Pipe Stress Engineer Resume

  • Coordinate with Civil/Structural groups to ensure loads are being effectively communicated
  • Strong professional experience in the field of strength calculations
  • Software Skills: MicroStation, PDMS, TIME, Caesar II ver9.0
  • Language Skills: Written and oral Norwegian and English
  • Experience with Pro-E, Solid Works, FEA software
  • Experience in traditional hand calculations and Mathcad is essential, CAD (SolidWorks or Unigraphics NX) and FEA (ANSYS)
  • Good knowledge of requirement gathering, define HW architecture, Analog & Digital Design,Testing
  • Experience in customer or vendor communication, Cross platform team communication, Mentoring & handling multiple projects

Experience For Senior Stress Engineer Resume

  • Experience in performing stress analysis and flexibility evaluations
  • To continue developing experience, expertise and confidence in technical areas with context of company’s administrative and technical procedures
  • Experience conducting Fatigue and Damage Tolerance (F&DT) analysis required
  • Coordination with piping design and pipe support to contribute to good design solutions
  • Experience of working on Autopipe or Ceaser II
  • Demonstrable experience in stress analysis covering a variety of tasks across a range of complexities
  • Demonstrable experience in the application of codes and standard covering a range of equipment types
  • Experience in the Oil, Gas, and Chemical Industry with an emphasis in pipe stress and support components
  • To produce stress substantiations using numerical methods, setting up cost effective FE models and providing engineering judgements on the results

Experience For Senior Pipe Stress Engineer Resume

  • 3 / 4 years of experience in analysing piping systems to ANSI / ASME Codes in relation to Piping Stress Analysis
  • Good working knowledge of the strength of material using FEM, knowledge of non-linear, dynamic, and thermal problems
  • Min. of 5 years’ experience in engineering
  • Experience of working in a commercial FEM software
  • Experience with detailed design project (EPC) execution

Experience For Senior Piping Stress Engineer Resume

  • Experience in Caesar II and FEM software
  • Experience required
  • Knowledge and experience of plant layouts and model review meetings and software
  • Directly related experience within stress or structures is required
  • Experience as a Structural Analyst and/or Stress Engineer required

Experience For Stress Engineer Level Resume

  • Experience with NASTRAN/PATRAN is required
  • Experience – 6 to 10 years
  • Five (5) years of functional work experience
  • Experience in a design organization heavily involved in aerospace design
  • Experience in test verification

Experience For Principal Pipe Stress Engineer Resume

  • Experience as a pipe stress engineer required
  • NASTRAN, Patran, or FEMAP experience
  • Experience in Aircraft System Design and/or Analysis
  • Previous Bechtel project experience
  • Previous DOD/DOE project experience
  • Experienced with Fatigue and Damage Tolerance Analysis and Knowledge of Commercial and Military Aircraft Certification Requirements

Experience For Offshore Pipe Stress Engineer Resume

  • Applicable experience in Refinery, Petrochemical, and/or EPC Industries
  • CAESAR II Software experience
  • Additional experience in aircraft actuation
  • Experience with versatile interface like I2C, USB2.0/3.0, LAN, Ethernet, PoE, BLE, Wi-fi, DDR2, DDR3, DDR4, SD Card, NAND, MIPI etc
  • Hands on experience in electronics is added advantage
  • Experience with schematics design & high speed PCB design guidelines
  • CE, FCC, RoHS, EN Standard Experience

Experience For Plant Engineering Stress Engineer Resume

  • Experience: 5 to 7 Years
  • Supporting manufacturing ramp-up (concessions and improvement modifications),
  • Providing Stress Support to co-workers in Engineering
  • Working within Safran standard procedures and stress handbook methods
  • Supporting in service air inlets (in service queries/airworthiness issues),
  • Supporting the program requests for modification

Experience For Junior Stress Engineer M/F Resume

  • Performing stress analysis using finite element method (FEM) and analytical methods
  • Working English language knowledge
  • Performing Stress Analysis of Primary and Secondary Aircraft Structure
  • Performing Stress Support for New Design
  • Knowledgeable in structural welding design and willing to become company's designated welding engineer by Canadian Welding Bureau
  • Check or supervise pipe stress engineering analysis for complex units such as compressor piping, fired heater piping, high and low temperature piping systems
  • Support the evaluation and disposition of manufacturing and/or inservice issues (sustaining engineering)

Experience For Stress Engineer, Contingent Resume

  • Support the evaluation and disposition of manufacturing and/or in-service issues (sustaining engineering)
  • To undertake the checking and releasing of engineering drawings, eg, general arrangement, test article and installation drawings
  • Knowledge of spring hanger and expansion joint design, piping line class specifications, procurement piping and fittings, and pipe supports
  • Knowledge of spring hanger and expansion joint design, piping line class specifications, procurement, piping and fittings, and pipe supports
  • A practising expert in Stress Engineering on Aircraft Landing Gear Systems

List of Typical Skills For a Stress Engineer Resume


Skills For Pipe Stress Engineer Resume

  • Prior experience using pipe stress analysis program such as ME101, Caesar II, and/or Bentley AutoPIPE
  • Prior experience using Bentley AutoPIPE pipe stress analysis program
  • Communicate effectively with audiences that include, but are not limited to, management, co-workers, clients, vendors, contractors and visitors
  • Previous experience as a Pipe Stress Engineer and/or previous Design/Structural Integrity experience within the nuclear industry is desirable
  • Communicate effectively with a variety of disciplines, both internally and with the customer
  • Good knowledge of product, assembly and component analysis, preferably with experience of Ansys workbench
  • Setting up cost effective FEM representation of products for linear, non-linear and dynamic analyses, applicable post processing and interpretation of results
  • Coding experience would be an advantage - Python, VBA
  • Experience from piping design according to ASME B31.3 including calculations for pressure, sustained and occasional loads and piping flexibility

Skills For Senior Stress Engineer Resume

  • Experience leading and managing engineering teams
  • Board Bring up, & testing, System level problem debugging skill
  • Experience in simplifying complex structural engineering problems with simple 2 D free-body-diagram and performing comparative analysis
  • Experience of conducting pipe stress analysis of piping systems
  • Experience of specifying and review of expansion joints, spring hangers etc
  • Experience of both Pipe supporting and Piping stress work process
  • Component design and analytical problem solving experience in an engineering environment
  • Strong understanding of manufacturing methods

Skills For Senior Pipe Stress Engineer Resume

  • Experience in interpreting and comparing test results to analytical models (strain readings on test vs FEM) on honeycomb structures
  • Experience in design using advanced materials, and fabrication technologies
  • Familiarity and/​or experience working with
  • Good knowledge of materials and their properties and their use in engineering design
  • Engineering/design experience in oil and gas or chemical or consumer products industry,
  • Experience with piping stress analisys ( in at least one of the tools: AutoPipe, Caesar),

Skills For Senior Piping Stress Engineer Resume

  • Work on multiple tasks, prioritizing as required
  • Excellent understanding of inter discipline interactions and coordination
  • BS in Mechanical or Agricultural Engineering or equivalent experience
  • Work experience required supporting aircraft structures
  • Experience with durability and damage tolerance of metallic structures using NASGRO /AFGROW is required

Skills For Stress Engineer Level Resume

  • Transport or Boeing 7-Series Aircraft experience
  • Experience using data to analyze production improvement opportunities and develop communication material and presentations
  • Strong knowledge of industry codes and standards (including API 610, API 650, API 660, API 661, ASME B31.3, ASME BPVC, etc.)
  • Good team working and work ethic
  • Experience of using hand calculations and methods from recognised texts such as Bruhn and Roark
  • Have hands-on finite element analysis experience using ANSYS Finite Element software
  • Have strong knowledge in formulating dynamic equations, and be familiar with Modal and Transient analysis procedures
  • Experience using Finite Element Analysis (FEA) methods

Skills For Principal Pipe Stress Engineer Resume

  • Previous experience of R&D and Conceptual Design teams
  • Extensive and indepth relevant industry and FEED/EPC Contracts experience
  • Onshore Oil and Gas design experience in upstream, downstream, and petrochemical sectors
  • Workshare experience with Satellite offices
  • Experience in the aerospace industry would be beneficial
  • Promoting and contributing to initiatives aimed at improving the performance of the stress team, engineering and the business

Skills For Offshore Pipe Stress Engineer Resume

  • Producing, reviewing, verifying and approving calculations, analyses and technical reports
  • Producing, reviewing, verifying and approving technical specifications and method statements
  • Monitoring and reporting on stress deliverables for the programme and feedback to the Engineering Project Manager
  • Ensuring that adequate Reviewing, Verifying & Approval is undertaken on all their deliverables and for those under their direct control and supervision
  • Understanding of material engineering properties
  • Understanding of working to regulatory requirements
  • Working with the customer, suppliers and key stakeholders to ensure stretching programme demands are met
  • Specifying EJs, spring hangers
  • Knowing what influences other disciplines and communicating with the other party

Skills For Plant Engineering Stress Engineer Resume

  • Representing Company as a Landing Gear Subject Matter technical expert in both internal and external projects
  • Providing technical expertise in respect to pipe stress engineering, application of international standards, and compliance to Client specifications
  • Ensuring that procedures, codes and standards are correctly identified and applied to engineering and technical activities
  • Performing pipe stress analysis for piping
  • Applying & Anticipating
  • Building & Maintaining
  • Working with transient specifications, drawings and alongside fluid system engineers to undertake ASME III NB/NC 3600 analyses
  • Producing safety case documentation for pre-released plant pipework to meet customer programme dates
  • Producing safety case documentation for in-service pipework to ensure continued operation and to support product life extensions

Skills For Junior Stress Engineer M/F Resume

  • Responding to emergent issues, as part of a dynamic team, to support the fleet
  • Working knowledge of ANSYS Workbench FEA tool would be of benefit
  • Working knowledge 14 CFR Part 25 Regulations as it pertains to Aircraft Structures, Interiors, Materials, Mechanical Systems and Payload Systems
  • Working knowledge of industry accepted Finite Element Program, NASTRAN
  • Working knowledge of classical hand analysis of aircraft structural components and assemblies

Skills For Stress Engineer, Contingent Resume

  • Working knowledge of accepted design practices and solutions in Aircraft Industry
  • Working towards or already in possess A1020 delegated signatory status
  • Providing technical leadership and direction to the team
  • Willing to travel to attend design review meetings, and assist in equipment installation
  • Supporting estimates for bids
  • Supervising engineers/technical specialists within the same discipline
  • Ensuring that a fit for purpose approach is adopted in the production of all outputs

List of Typical Responsibilities For a Stress Engineer Resume


Responsibilities For Pipe Stress Engineer Resume

  • Strong Expertise in the areas of structural analysis of metallic and composite structures. Experience in the analysis of repair techniques
  • Experience with test equipment, logic/protocol analyzers, and oscilloscopes
  • Hands on experience Caesar-II of Stress Critical Lines and other relevant calculations for at least 10 years
  • Produce the necessary reports to demonstrate that the design satisfies all relevant EASA or FAA regulations
  • Provide guidance, supervision and mentorship to less experienced engineers

Responsibilities For Senior Stress Engineer Resume

  • Experience required, with at least 4 years in the Refinery, Petrochemical, and Oil & Gas Industry
  • Experience ' 6 to 12 years
  • Experience comparable with the grade in a relevant industry
  • Experience of pipe support design
  • Experience in writing stress documentation and specifications to FAA standards

Responsibilities For Senior Pipe Stress Engineer Resume

  • Preparing man-hour estimates, CTRs and input to schedule on units/projects for which Senior Engineer is responsible
  • Knowledge in Piping Layout Design and Piping Material Engineering is required
  • Create new and update existing Engineering Standards as required by project
  • Provide support to Lead Piping Engineer for manhour estimates and manpower, schedule and budget planning
  • Responsible for piping stress analysis of piping systems on projects
  • Participate in scope definition during bid / project execution / work sharing stages
  • Responsible for ensuring Department/Team training completion
  • To undertake the checking and releasing of detail components, sub-assembly and general assembly structures

Responsibilities For Senior Piping Stress Engineer Resume

  • To undertake the checking and releasing of detail, sub-assembly, general assembly and installation drawings
  • Support process engineering and maintenance activities, and troubleshoot pipe stress / vibration problems in operating plants
  • Higher technical education (mechanics or mechanical engineering, aviation engineering or other related)
  • To support the dispositioning of manufacturing non-conformances and the definition of repair solutions where necessary
  • Perform FEA evaluation of stresses at nozzles, or for determining user calculated SIFs, using NozzlePro, FE/Pipe or other FEA software
  • Provide engineering support by answering technical questions and requests
  • Prepare technical presentations for the advancement of technical knowledge of the piping engineering group
  • Some knowledge of line list, piping material specifications, and piping specialty items is required
  • Consult with department manager and other senior personnel on technical problems, staffing requirements, and schedule issues relating to project commitments

Responsibilities For Stress Engineer Level Resume

  • And also developing a brain new inlet in the scope of Nacelle In Sourcing initiative
  • Motivate, coach and manage a team including conducting annual performance reviews
  • Conduct pipe stress engineering of piping systems
  • Perform structural analysis and simulation using conventional classical stress analysis
  • Create informal strength check notes using Microsoft Word et al
  • Works directly with FAA DER’s on structural testing
  • Preparation of Pipe Stress design deliverables, including studies, detail design deliverables and close out

Responsibilities For Principal Pipe Stress Engineer Resume

  • Responsible for review of corresponding documents
  • Have working knowledge of naval and military standards, and familiarity with structural steel, stainless steel, and aluminum alloy specifications
  • Proficient in Pro/E modelling is an assets
  • Checks engineering packages and where possible, to gain authorized signatory status for their area of expertise
  • Participates as a team member in a specific phase of a broad engineering assignment
  • Assists in determining project objectives to contribute to the development of a comprehensive project design
  • Work in accordance with the Being Cavendish Nuclear Principles
  • Issues technical part of requisitions for all piping support components required by stress analysis

Responsibilities For Offshore Pipe Stress Engineer Resume

  • Issues technical bid evaluation for all piping support components
  • Checks isometrics for construction of critical lines issued by drafting
  • Support design engineering with mechanical evaluation throughout product development
  • To maintain a clean, organised and safe working environment and to support 6S initiatives
  • To promote and contribute to initiatives aimed at improving the performance of Stress and the Business
  • Support the planning definition (estimation of required time to perform tasks
  • Present results during project reviews
  • To technically verify stress reports using BTG0036 procedure
  • To provide structural substantiation for new design and modifications to existing designs

Responsibilities For Plant Engineering Stress Engineer Resume

  • To provide structural substantiation for manufacturing non-conformance solutions
  • Produce detailed analysis reports ensuring compliance with industry/client codes, work processes, and standards
  • Participate in reviews of PFD's, P&ID's, Piping ISOs, & Structural Drawings
  • Perform calculations for spring supported equipment
  • Coordinate with Piping discipline to determine the stress analysis due dates to support isometric issue schedule
  • Pro-active and willing to take initiative
  • Perform crack growth and residual strength analysis using NASGRO
  • Develop fatigue spectrums and support fatigue and damage tolerance testing

Responsibilities For Junior Stress Engineer M/F Resume

  • Analyzes engineering designs, schematics, and customer specifications to determine stress requirements for a product
  • Perform classical hand stress calculations, finite element analysis utilizing finite element software such as NASTRAN or ANSYS
  • Intermediate knowledge of finite element modeling, and familiarity with MS Office products
  • Familiar or willing to learn about Semiconductor facilities
  • Is capable of appropriate use of computer applications and other specialized engineering tools
  • Employees working on programs subject to International Traffic in Arms Regulations (ITAR)
  • Thorough knowledge of aircraft electrical systems, drawing development and FAA requirements
  • Master of Science in Mechanical, Civil or Aerospace engineering
  • Finite Element Analysis Using MSC/NASTRAN and PATRAN

Responsibilities For Stress Engineer, Contingent Resume

  • Capable of taking a strategic view
  • Capable of interfacing professionally with customers and suppliers at all levels
  • Knowledge of farming equipment and basic practices
  • Carry out stress and flexibility analysis using Caesar II software
  • Complete pipe stress analysis using Caesar II
  • Provide support and technical expertise in the area of structural strength to other engineering functions with specific focus in the area of Damage Tolerance
  • Do programming in Python, VB, and/or Matlab
  • EMI/EMC design and testing

Related to Stress Engineer Resume Samples

Nuclear Engineer Resume Sample

Work Experience

  •  Support station equipment reliability and power uprate projects   •  Evaluate plant design changes for acceptability with respect to civil and structural design standards   •  Support on-going station enterprise design document system improvement initiatives, including data migrati...
Professional Skills

  •  Knowledge of and experience with programmi...
  •  Applies teamwork, influencing, and communi...
  •  Experience with verification and/or valida...
19 votes

Risk Engineer Resume Sample

Work Experience

  •  Take a leadership role in ensuring modelling project deliverables meet clients’ needs   •  The ongoing coordination and development of a standardized CIP Engineering risk engineering approach to analyzing exposures and controls for the CIP Engineering portfolio   •  Assisting in th...
Professional Skills

  •  Mastery level word processing and technica...
  •  Attending Risk Engineering Surveys carried...
  •  Undertake day-to-day risk management activ...
12 votes

Solutions Engineer Resume Sample

Work Experience

  •  Experience of creating technology solutions, working with project managers and more senior solutions architects to ensure that the validity of the overall solution is fully represented and considered   •  Experience of working with external and internal suppliers to develop solutions   •&nbs...
Professional Skills

  •  Strong written and verbal communication sk...
  •  B.S. in Computer Engineering, Electrical E...
  •  Experience developing and enhancing strong...
11 votes

Engineer Electromechanical Resume Sample

Work Experience

  •  · Background in Electro-mechanical design is an asset   •  · Electro-mechanical design and product development is an asset   •  · Basic understanding of railway Rolling Stock both theoretical and practical   •  Develop product drawings and models. Manage the mod...
Professional Skills

  •  Independent working ability; strong initia...
  •  Computer skills: e.g. .net programming skills
  •  Strong technical problem solving skills (i...
17 votes

Assistant Director Engineering Resume Sample

Work Experience

  •  Stationary Engineer’s license if required by local code   •  The worker is subject to noise: there is sufficient noise to cause the worker to shout in order to be heard above the surrounding noise level   •  The worker is subject to vibration: exposure to oscillating movements of t...
Professional Skills

  •  Excellent customer service skills with gre...
  •  Demonstrate strong leadership, good interp...
  •  Demonstrated skills in effective budget an...
11 votes

Engineer Service Resume Sample

Work Experience

  •  Install, configure, and upgrade nodes in high availability customer production clusters   •  Build long lasting, effective partnerships across the organization to foster collaboration between Product, Engineering and Operations teams   •  Organize and manage multiple simultaneous p...
Professional Skills

  •  IT experience in an IAAS / PAAS environmen...
  •  Previous experience with Network Administr...
  •  Very good verbal and written communication...
23 votes
Resume Builder

Create a Resume in Minutes with Professional Resume Templates