Building Automation Resume Sample

5.0
10 votes
Resume Create

The Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Sierra Beier
84386 Fabiola Village,  Boston, MA
+1 (555) 579 2769

Work Experience


Building Automation & Optimization Specialist
06/2015 - PRESENT
Boston, MA
  • Commissioning Control System
  • Determines equipment malfunctions using status and alarm printout messages identified by a computerized system. Informs appropriate staff of the nature and location of the problem
  • Performs surveillance and exercises control over the schools' refrigeration equipment; monitors thousands of points and controls at various locations; adjusts pneumatic and electronic controls on equipment in order to meet changing building load requirements and weather conditions from a remote location
  • Programs automatic occupancy scheduling of all HVAC equipment to bring temperature levels in all buildings to specific guidelines. Notifies staff personnel of program failure
  • Regulates controls and other devices governing temperature and/or humidity at schools; checks air flow and takes readings of air and steam flow for air conditioning units. Adjusts motors, dampers and fans using automated system
  • Processes monthly utility bills for payment; organizes an assortment of records; generates and processes work orders
  • Install, commission, troubleshoot and repair all BAS/Energy management end devices to include but not limited to: transducers, sensors, controllers (PXC, TEC, AEM, TCV)
Building Automation System Technician
08/2011 - 04/2015
Detroit, MI
  • Write and commission programming code sequences to BAS
  • Work closely with HVAC Mechanics and Controls Contractors for process resolutions
  • Apply knowledge and experience in the day-to-day operations and maintenance of all related building automation systems
  • Perform startup and commission, troubleshoot and repair computerized temperature control systems which control HVAC equipment such as roof top units, air handlers, VAV boxes, heat pumps, chillers, pumps, cooling towers, boilers, and heat exchangers
  • Perform equipment and systems tests, installation inspection, troubleshooting and problem determination, control panel wiring and checkout, and repair of computer automated control systems
  • Perform field device inspection, testing and calibration, hardware operation verification, software configuration programming and testing of equipment sequence of operations
  • Experience in building controls and automation, including troubleshooting diagnosis and repair of emergency management systems
  • Knowledge of standard practices of the HVAC trade
  • Knowledge of applicable building codes, ordinances and regulations
Building Automation Control Tech A
08/2005 - 05/2011
Philadelphia, PA
  • Knowledge of health and safety regulations
  • Control systems experience and BS in Engineering or 10+ years of experience with control systems or a combination of education and experience resulting in >10 verifiable years of industry knowledge
  • Alerton and/or Siemens experience at the system developer level
  • Strong understanding of building mechanical systems is required
  • Previous Critical Facilities experience
  • Understanding of BACnet routers, BACnet Broadcast Management Device/Broadcast Distribution Tables
  • US and international
  • Work simultaneously on multiple projects, in a team or independently, with little to no oversight
  • Previous experience with successfully managing projects and project teams

Education


Wittenberg University
2000 - 2005
Engineer's Degree in Engineering

Professional Skills


  • Strong verbal and written communication skills and strong interpersonal skills are required
  • Read blueprints, schematics, and apply troubleshooting skills effectively
  • Demonstrated customer services skills (internal and external)
  • Masters License in Mechanical, Plumbing, HVAC or five (5) years proven experience working as a Building Automation Engineer in some form
  • Intermediate skills with Microsoft Office applications (Word, Excel, Outlook)
  • Electrical skills and knowledge of code compliance
  • Five years experience in the design and implementation of DDC building control systems including programming, troubleshooting, operation and maintenance

How to write Building Automation Resume

Building Automation role is responsible for software, integration, training, database, security, telecommunications, architecture, manufacturing, design, digital.
To write great resume for building automation job, your resume must include:

  • Your contact information
  • Work experience
  • Education
  • Skill listing

Contact Information For Building Automation Resume

The section contact information is important in your building automation resume. The recruiter has to be able to contact you ASAP if they like to offer you the job. This is why you need to provide your:

  • First and last name
  • Email
  • Telephone number

Work Experience in Your Building Automation Resume

The section work experience is an essential part of your building automation resume. It’s the one thing the recruiter really cares about and pays the most attention to.
This section, however, is not just a list of your previous building automation responsibilities. It's meant to present you as a wholesome candidate by showcasing your relevant accomplishments and should be tailored specifically to the particular building automation position you're applying to. The work experience section should be the detailed summary of your latest 3 or 4 positions.

Representative Building Automation resume experience can include:

  • Experience with Building Automation / PLC / Process software programming (desirable but not essential)
  • Skilled in programming, job start-up and checkout, and troubleshooting
  • Extensive experience with System Checkout, Startup, Functional Testing, and Re-Commissioning
  • Strong working knowledge of building automation systems and how these systems can be enhanced to improve energy efficiency
  • Provide technical guidance to less experienced design and engineering personnel
  • Experience in the design of digital BAS/DDC systems for the building types listed above required

Education on a Building Automation Resume

Make sure to make education a priority on your building automation resume. If you’ve been working for a few years and have a few solid positions to show, put your education after your building automation experience. For example, if you have a Ph.D in Neuroscience and a Master's in the same sphere, just list your Ph.D. Besides the doctorate, Master’s degrees go next, followed by Bachelor’s and finally, Associate’s degree.

Additional details to include:

  • School you graduated from
  • Major/ minor
  • Year of graduation
  • Location of school

These are the four additional pieces of information you should mention when listing your education on your resume.

Professional Skills in Building Automation Resume

When listing skills on your building automation resume, remember always to be honest about your level of ability. Include the Skills section after experience.

Present the most important skills in your resume, there's a list of typical building automation skills:

  • Strong AutoCAD and VISIO experience
  • Working knowledge of and practical experience with 2D and 3D drafting/design tools, including AutoCAD, REVIT and MicroStation
  • Working knowledge of and practical experience with automation requirements of ASHRAE 90.1 and LEED requirements
  • Experience with setting up graphics, point trending, air and hydraulic flow measurement and automation system commissioning
  • Well-experienced in maintaining and supporting Building Automation Systems
  • Experience with building and maintaining data acquisition and communications systems

List of Typical Experience For a Building Automation Resume

1

Experience For Building Automation System Technician Resume

  • Updating the business plan and strategy that can contribute to sales growth and Analyzing customer needs for the Business Unit’s product portfolio and conduct white spot analysis for effective and profitable sales growth expansion
  • Increasing customer database of competent System Integrators for ABB Building Solutions portfolio and establishing strong relationships with key customer’s management and Decision Makers and drive high levels of customer satisfaction
  • In conjunction with the Service Manager and service team ensure that our service contract customer’s expectations are met and exceeded to ensure long term service growth
  • Prior work experience assisting third party commissioning
  • Experience with troubleshooting, repairing, and calibrating BAS systems and components
  • Experience with troubleshooting and editing BAS programs
  • Manage and prioritize multiple projects with a constant focus on deadlines
  • Maintain effective communication with project team members and with the internal and external customers
  • Experience with industry BAS design practices and implementations for both large and small projects
2

Experience For Building Automation Engineer Resume

  • Experience with mission critical and laboratory control systems highly desirable
  • Experience with control system design, development and management
  • Write detailed sequence of operation how system operates with changes made
  • Assist in-house mechanical engineers with retrocommissioning HVAC system projects on campus to ensure that they are functioning properly
  • Ensure full BAS is operating within design parameters to maintain building pressurization in accordance with established design guidelines
  • Complete paperwork on-time including time sheets, expense reports, posting of work order, on-site documentation and project status reports
  • Perform Preventative, Corrective and Emergency maintenance on customer’s Building Management Systems, Servers/Front Ends and HVAC related equipment
  • Experience with all varieties of commercial HVAC systems focusing on the coordination between chilled water central plants, variable air volume and radiant systems
  • Familiarity with building automation communication protocols (BACnet, Modbus and LONworks) as well as control network architecture
3

Experience For Building Automation Control Tech A Resume

  • Provide high-level, technically advanced advice, trend study analysis, and programming assistance to energy service contractors, as well as in-house staff
  • Conduct maintenance and repairs on designated primary and/or critical mechanical Building Automation Systems
  • Performs preventative maintenance and diagnostics on all automation system and components according to contracts requirements
  • Responsible for scheduling repairs
  • Be able to review and modify complex custom programming for local and network level controls
4

Experience For Building Automation & Optimization Specialist Resume

  • Maintain accurate As-Buil drawing package and make changes in Visio, Excel, Word, as required
  • Responsible for calibration of systems requiring basic electronic test equipment, such as multi-meters, network terminals, and'or a laptop computer
  • Knowledge of BAS DDC and PLC programming language
  • Provide on-the-job training to BAS operators
  • Familiarity with HVAC and electrical controls installation, field devices and control panel knowledge
  • Perform all aspects of control system engineering and design, including preparation of construction documents, detail drawings, cable distribution risers, and specifications for control systems
  • Use of computer-aided design software to generate conceptual control schematics
5

Experience For Engineering Specialist, Building Automation Resume

  • Coordinate BAS functional and physical requirements with multi-discipline design teams to develop BAS functional descriptions, schematic diagrams, sequences of operation and product specifications
  • Research, develop and recommend solutions to a wide range of system and equipment communications integration issues under general direction
  • Coordinate control interface with other building design disciplines (Architecture, HVAC, Process, Plumbing, Fire Alarm, Security, Lighting Controls and Telecommunications Infrastructure)
  • Continuous interaction with project managers, engineers and designers concerning projects and scheduling requirements
  • Support cost estimating efforts for BAS scope definition
6

Experience For Senior Building Automation Engineer Resume

  • Preventative, Corrective and Emergency maintenance on customer’s Building Management Systems, Servers/Front Ends and HVAC related equipment
  • Maintain controls hardware and programming at the most advanced level across all CSU campuses
  • Performs preventative maintenance and diagnostics on automation systems and components as outlined in the technical support program
  • Primary service responsibility for assigned customer accounts
  • Respond to work orders that require immediate attention (Do It Now or DIN calls) to buildings on multiple campuses: Main, South, East, & ARDEC
  • Navigate all three of the “front end” applications (Envision, Extend, Architecture, and Insight) for the three control vendors – Alerton, Johnson Controls, and Siemens on all campuses of CSU
  • Become familiar with the different campuses controls – CSU is unique in that systems used range from 40 years old to the most recent versions/releases
  • Design and apply alternate sequence of operations specifically for the purpose of energy savings
7

Experience For Building Automation Service Technician Resume

  • Provide integration assistance with third-party equipment and software manufacturers as a means of data collection and control associated with energy saving opportunities
  • Update old drawings and/or create new, accurate control drawings which include flow layouts, point schedules, sequence of operations, and wiring diagrams for each controller that is to be retrofitted
  • Become familiar with how DDC devices work and how to move hardware points from controller to controller
  • Install hardware and know how to put new controllers onto the BAS network and the steps involved with getting the device to communicate across the controls networks
  • Proficient in commissioning new devices to ensure proper functionality with their new programming and all the parts of the controlled systems are operating as desired by the new controller
  • Utilize software that is essential to build and adjust alarming and trending for JCI, Alerton, and Siemens systems installed in campus buildings
  • Use Iconics Genesis 32, TrendWorx32, AlarmWorX32, and GraphWorx32 to configure BAS vendor’s data for alarming and graphical interfacing
  • Troubleshoot and address any issues that could arise after device upgrade
  • Build and adjust trends used to monitor both long-term and short-term issues
8

Experience For Building Automation Systems Technician Resume

  • Make modifications and manipulate OPC graphics that reflect all of the buildings and their systems. This tool is essential for Controls Technicians, HVAC Technicians, as well as other personnel throughout Facilities Management and their contracting peers
  • Create, modify, and simulate control programs such as JCI BACnet/N2 devices, Alerton BACnet devices, Siemens BACnet devices on campus using HVAC PRO, GX9100, CCT, VisualLogic, APOGEE, and other controls programming tools
  • Map all associated points to operator workstation in Metasys Extended Architecture, Envision, and Insight and Iconics
  • Review current control programs in controllers and change the programs to meet the mechanical engineers desired intent
  • Completes service repairs, replacements, upgrades, adjustments and calibration on automation systems and components following maintenance, troubleshooting and installation instructions
  • Verify and inventory the BAS utility software on site
  • Verify and report the number of BAS computer stations and/or lap-top computers on site and the software information. Update software as necessary
9

Experience For Application Engineer Home & Building Automation Resume

  • Troubleshoot BAS controllers, actuators, and sensors and variable frequency drives, and develop SOW and BOM for follow-up repairs to bring the system within design parameters
  • Provide a combination of classroom instruction and hands-on guidance to insure proper PM and repair of designated equipment and systems to local Post personnel as directed
  • Assist Post in planning work, obtaining material product data, scheduling shipments, coordinating logistics, and identifying requirements to minimize impact on local operations
  • Review available as-built drawings, compare the documents to existing conditions at each facility during site visit, and make necessary red line changes to the document to reflect actual conditions at each facility
  • Responsible for the repair, modification, calibration and installation of control systems. Diagnose and remedy problems
  • Assist in the repair of equipment, as required
10

Experience For Building Automation System Controls Engineer Resume

  • Instruct other personnel in the installation, repair, calibration and all other maintenance procedures on the AHU and control systems
  • Responsible for PM (Preventive Maintenance), update and oversight of the HVAC systems. This includes the documentation and storage of records to verify the PM procedures and the safe and proper operation of these systems
  • Exercise independent judgment in the priority of work on control systems in conjunction with supervisor
  • Work experience with the Schneider Electric/Invensys/Barber Colman and Tridium control systems
  • Responsible for the inspection of major components newly installed in the HVAC systems

List of Typical Skills For a Building Automation Resume

1

Skills For Building Automation System Technician Resume

  • Completion of a four-year apprenticeship in an applicable skilled trade or knowledge obtained through four years of on-the-job experience in a related position
  • Experience with network, security, and hazard/risk reporting
  • Experience in managing automation, control, and small energy projects
  • Experience with electrical systems and principles including lock out tag out and NFPA 70E
  • Experience with industrial electronics; Tuning Control Loops
  • Experience with basic diagnostic and calibration equipment, including multimeters and calibration blocks
  • Experience with Automated Logic Corporation (ALC) building automation systems
  • Experience with the development and implementation of control sequences of operation as related to building operation and energy efficiency
2

Skills For Building Automation Engineer Resume

  • Experience with BACnet and LON systems integration
  • Experience with MS Word, Excel, Outlook
  • Experience with SCADA Systems Integration, PLC/PAC Automation
  • Experience with Boiler Control Systems retrofits, optimization, and integration with BAS systems
  • Technical experience
  • Possess/maintain valid and current Driver's License and be insurable by company's insurance carrier
  • Very good health, vision, dental plan with many options to choose from
3

Skills For Building Automation Control Tech A Resume

  • Demonstrated knowledge of and ability to interpret control and electrical schematics drawings
  • Demonstrated ability to install and program Johnson Controls, Alerton, and/or Siemens systems
  • Demonstrated proficiency in HVAC controls diagnostics and repairs
  • Experience with computers and multiple automation system platforms
  • Experience with HVAC control system design, development and management
  • Ten (10) years commercial HVAC experience
  • Strong IT and server hardware background is desired
  • Providing feedback to Product Marketing Team on competitors’ sales and marketing activities including product ‘gaps’ in existing ABB range
4

Skills For Building Automation & Optimization Specialist Resume

  • Working closely with 3rd party suppliers whose product portfolio can enhance and fill product ‘gaps’ in ABB’s Building Solutions offering
  • Troubleshooting Instrumentation and Control Systems
  • Working knowledge of Microsoft Visio, Excel, and Word
  • Working knowledge of the operations of Mechanical and Electrical Systems and Equipment in Buildings and Central Utility Plants
  • Typical physical demands require full body motion, including ability to perform work while bending, stooping, stretching, climbing ladders
  • Work requires bending, kneeling, climbing, and working in cramped or awkward positions
5

Skills For Engineering Specialist, Building Automation Resume

  • Work involves regular lifting, carrying, and holding objects weighing up to 80 pounds
  • Capable of climbing ladders or using other lift equipment in excess of 8 feet above grade, and capable of lifting up to 50 lbs
  • Typically required to lift and carry machinery and/or equipment weighing 25 to 100 pounds and/or assist with lifting weights exceeding 100 pounds
  • Work involves wearing special or protective clothing such as: aprons or overalls, gloves, and goggles or masks
  • Knowledge of Computers and various operating systems and software. Working network configuration capabilities
  • Design and specify, with minimal direction and supervision, Building Automation Systems (BAS) to control and monitor building mechanical and electrical systems
  • Travel to various equipment and bench testing as well as remotely located design working sessions
  • Capable of performing system integration and networking / switch familiarity
6

Skills For Senior Building Automation Engineer Resume

  • DIN calls require knowledge in multiple disciplines including HVAC, Electrical, TAB, Networking, HVAC system knowledge, and device/controller knowledge
  • Capable of troubleshooting our equipment and customers’ process
  • Performs work according to manufacturer’s specifications, FO&M guidelines, trade practices, blueprints, shop drawings and schematics
  • Fundamental understanding of Industrial Process, Measurement, Automation and Control
  • Fundamental understanding of Laboratory Processes, Measurement, Automation and Control
7

Skills For Building Automation Service Technician Resume

  • The ability to apply knowledge of multiple communications protocols including Modbus, Bacnet, Johnson Controls N2 and other Johnson protocols
  • Extensive product training and career development
  • Basic working knowledge of pneumatic control systems, air compressors, air dryers
  • Extensive knowledge of HVAC air handling, exhaust, and hydronic systems operation
  • Additional education or certification related to BAS/industrial controls, HVAC, computer programming, etc
  • Create formal documentation, including memorandums, reports, status reports, etc., which are routine deliverables
  • Understand the programming language (highly desirable, but not a requirement)
  • Managing a team of at least 8
  • Department of Motor Vehicles (DMV) Screening
8

Skills For Building Automation Systems Technician Resume

  • Work is performed: indoors, outdoors, in bad weather, in areas that are noisy, dirty, or smoky
  • Class 5 Driver’s License
  • Practical knowledge and application of GMP’s and EMEA regulations
  • Troubleshoot, and repair control issues within HVAC and central utilities’ automation systems
  • Class 5/GDL Driver’s License
9

Skills For Application Engineer Home & Building Automation Resume

  • Experience working in the life sciences, biological, and/or pharmaceutical industries with exposure to fume hood controls, clean rooms, vivariums, and other types of wet lab and bio-safety controls systems
  • Experience with managing service providers and service contracts
  • In-depth knowledge of electronic, electrical, HVAC, Plumbing and Mechanical systems and the digital and/or pneumatic controls that operate and monitor these systems
  • Build mathematics into controls logic to support diagnostics, calibration and performance
  • Apply Standard Instrumentation and Control drawings and sequences
  • Size, Select, and Apply Process Control Valves
  • Apply, protect and optimize motor controls and variable frequency/speed drives
  • Troubleshoot Digital Valve Controllers
10

Skills For Building Automation System Controls Engineer Resume

  • Maintain Pneumatic Components in Measurement and Control
  • Install, calibrate, and maintain electronic instruments
  • Experience and working knowledge of process grade devices, metering equipment, and operational intelligence software similar to Emerson Ovation, RSLogics, and their integration/data management with JCI and OSI Pi
  • Basic understanding of control logic
  • Willingness to travel in excess of 50% of typical work week, mostly local travel and seldom overnight stays

List of Typical Responsibilities For a Building Automation Resume

1

Responsibilities For Building Automation System Technician Resume

  • Maintain spare parts inventory and requisition parts for systems
  • Complete required documentation of activities (Work Order)
  • Read and interpret technical manuals, pneumatic diagrams, flow charts and control prints
  • Convert raw data into report form and present data in a clear and concise form
  • Lift and carry fifty (50) lbs., able to climb, balance, kneel, crawl, work in confined space and maintain other working positions for extended periods of time
  • Operate test equipment such as multimeters, ammeters and data logging instruments
  • Knowledge of commercial buildings’ mechanical and electrical systems
  • Read and interpret HVAC drawings, sequence of operations and detailed control drawings
2

Responsibilities For Building Automation Engineer Resume

  • Responds to customer service calls (emergency, on-site, or on-line), checks indicated points of trouble, analyzes full requirements of system involved and checks and tests systems components. Diagnoses trouble or defect, determines corrective action and repairs system
  • Performs preventative maintenance and diagnostics on automation system and components according to TSP / service agreement contracts. Tests and verifies system readings ensuring an optimal system operation
  • Identifies additional chargeable opportunities including time and material work, system upgrades and service contact expansion. Prices, proposes and proceeds with new work as per issued guidelines
  • Knowledge and experience with Building Automation systems (desirable but not essential)
  • Works with other branch, company or external service providers or vendors to arrange servicing and to resolve problem
  • A basic knowledge of HVAC fundamentals and systems
  • Assist with startup, commission, and re-commission of customer systems that utilize pneumatic / electrical/ electronic technology
3

Responsibilities For Building Automation Control Tech A Resume

  • Track & Record job progress and keep lead project personnel informed on progress
  • Completes and submits time sheets and other necessary information weekly
  • Capacity to learn and uphold policies/regulations (State, University, Facilities Management)
  • Be resourceful and provide solutions
  • Hold a valid Master Building Automation System license at a State level and are a graduate of a State approved/accredited or military program that provided formal HVAC Journeyman level instruction and training
  • Willingness and desire to travel, and work independently
  • Experienced in the basic control of air handling units, air distribution, and monitoring as well as performing or supervising the change in control code to address operational issues or support retrocommissioning activities
4

Responsibilities For Building Automation & Optimization Specialist Resume

  • Certification in advanced operation of DDC software and components required
  • Evaluation, identify and troubleshoot BAS issues and deficiencies
  • Revise current sequence of operations to improve system energy performance
  • Involved in KNX Organization in Mexico (KNX certification if it’s possible)
  • Replaces and calibrate temperature and humidity sensors, static pressure sensors, variable frequency drives and controllers. Verifies all sensors are accurate and all economizer dampers are properly functioning
  • Processes work order assignments and oversees the completion; tracks monetary expenditures of control materials in a simple spreadsheet, and organizes an assortment of records
5

Responsibilities For Engineering Specialist, Building Automation Resume

  • BAS training experience
  • Work closely with maintenance technicians, energy manager and controls contractor for process resolutions
  • Experience at a programmer’s level for Johnson Controls Metasys, Controller Configuration Tool (CCT), Logic Connector Tool (LCT), System Configuration Tool (SCT) and User Interface (UI)
  • 3/17/2015 Applicant Searches
  • ICRA 8 Certification
  • Subject Matter Expert (SME) for site facility BMS and PLC based systems, including managing system upgrades, development of operational enhancements, and implementation of continuous improvement projects and engineering analysis of system performance. Author Change Control’s per approved procedures in support of completing changes to validated systems: 40%
  • Troubleshoots software and hardware in conjunction with other trades. Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems. Maintain the operational/maintenance SOP’s for BMS systems. Assist in the installation, trouble shooting and maintenance of the BMS for ongoing capital project support: 25%
  • Serve as constant resource to other trades in a wide range of ways (e.g.: overriding and manipulating equipment for motor/pump technicians, or overriding and manipulating steam equipment for plumbers, or assisting HVAC Technicians with anything from device and controller issues to system manipulations using multiple control vendors equipment on different campuses)

Related to Building Automation Resume Samples

Automation Engineer Resume Sample

Work Experience

  •  Support the configuration, administration and maintenance activities of the site’s manufacturing computer and automation systems, including process control systems, building automation systems, manufacturing execution systems, and data historians   •  Identify opportunities to improve existing process...
Professional Skills

  •  Strong communication skills (both verbal a...
  •  Strong programming skills & troubleshootin...
  •  Strong time management and project managem...
4.6
22 votes

Marketing Automation Resume Sample

Work Experience

  •  Creating, managing and presenting an actionable Blueprints that align client’s requirements with ExactTarget Statement of Work   •  Lead and manage Rockwell Automation’s global marketing digital demand generation and customer acquisition enablement, segmentation, inbound/outbound and programmatic adve...
Professional Skills

  •  Strong written and verbal communication sk...
  •  Excellent organizational and communication...
  •  Proven skill/experience in designing custo...
5.0
11 votes

Software Automation Resume Sample

Work Experience

  •  Design software that drives new robotic instruments during manufacturing   •  Develop systems that interface with external sensors and motors   •  Work closely with other members of the cross-functional product development team and have exposure to other departments throughout the ...
Professional Skills

  •  Strong interpersonal skills, excellent ver...
  •  Strong problem solving, critical thinking,...
  •  Strong programming skills in one or more g...
4.9
17 votes

WEB Consultant Resume Sample

Work Experience

  •  Problem Management - Root cause analysis   •  Determining prevention items (fixes, how to prevent further occurrence of an issue)   •  Works with Information Technology architects to insure legacy applications integration   •  Participates in evaluations of new ...
Professional Skills

  •  Strong change management skills with a Cle...
  •  Excellent influencing, negotiating, projec...
  •  Strong consulting skills making digital re...
4.9
14 votes

Oracle Manager Resume Sample

Work Experience

  •  Assist Oracle Marketing Cloud sales enablement team on operationalizing messaging across the Marketing Cloud’s global sales unit   •  Supervise development team members through hiring, performance appraisals, pay rate reviews, delegating, promoting, coaching, counseling and terminating as needed  ...
Professional Skills

  •  Experience and Strong Implementation skill...
  •  Experience with other Oracle Middleware te...
  •  Excellent leadership, written communicatio...
4.8
20 votes

Consultant Solution Resume Sample

Work Experience

  •  Extensive experienced in reviewing and debugging code in the following software languages: HTML,JavaScript, SQL, XML   •  Experience working closely with external clients throughout the full implementation of the project   •  Staying up to date on Workforce Ready releases and futur...
Professional Skills

  •  Understanding of the technology industry a...
  •  Understanding of the technology industry a...
  •  Understanding of industry issues & ability...
5.0
18 votes
Resume Builder

Create a Resume in Minutes with Professional Resume Templates