Manufacturing Lead Resume Sample

11 votes
Resume Create

The Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Deon Okuneva
4477 Matilde Ferry,  Philadelphia, PA
+1 (555) 323 8473

Work Experience

Manufacturing Lead
09/2017 - PRESENT
Chicago, IL
  • Drive the following key metrics: safety, quality, PPH & customer service
  • Measure and communicate cell performance to department leadership
  • Provide direction to all operators and set ups in the cell and manage the daily operations to meet established targets
  • Ensure product quality though accurate and timely completion of in-process inspections, DHR reviews, lot release and rework
  • Work with associates to ensure they arrange coverage for vacation, absenteeism and scheduling overtime as required
  • Ensure accurate and timely SAP & MES transactions
  • Drive problem resolution and is the key contact with outside resources (engineers, tech services, document control, tool room) to ensure cell success
  • Responsible for 100% PM compliance within the cell by working with the PM team
Otis Global ERP Manufacturing Lead
10/2014 - 04/2017
San Francisco, CA
  • Ensure cell associates are trained in safety, quality and operations
  • Build and develop teamwork within cells and between cells to create a single unified department
  • Drive continuous improvement efforts by utilizing CI practices (KAS, Blitz's) and adhering to standard work practices
  • When necessary, substitute for cell associates to provide coverage for meetings, unplanned absence, etc
  • Assist engineers with project work within the cell
  • Provides direct performance feedback to associates
  • Participate in the hiring process for cells
  • Participate fully to achieve the department's safety goals
  • Take responsibility for own safety
SAP Manufacturing Lead
11/2010 - 05/2014
Phoenix, AZ
  • Hold self-accountable to follow all safety policies & procedures
  • Debrief accidents & implement solutions to eliminate root cause
  • Hold team members to safety standards/regulations & policies
  • Drives efficiency with consumer contact reporting by keeping track of CCI’s, following up with EM’s on status, closure, and reporting back to BU
  • Safety, quality, PPH & customer service
  • Accountable for daily operations on the production floor, including shift teams’ schedule adherence, staffing, training, material use and troubleshooting to ensure that all operations are in full compliance with applicable MBRs, SOPs, and safety guidelines
  • Provide operational controls and monitor labor (absence, vacation and OT) and other group expenses


University of Phoenix - Northern Nevada Campus
2006 - 2010
Engineer's Degree in Business

Professional Skills

  • Possess excellent communication skills to all levels throughout the organization
  • Strong computer skills are required with the ability to quickly learn new programs
  • Assists with the skills training plans (matrices) and provide training to employees for cells specific training
  • Experience leading teams or projects strongly desired
  • Basic PC computer skills, proficiency using MS Office-(Word, Outlook, Excel)
  • Strong interpersonal/team-building skill sets
  • Work with others (interpersonal skills)

How to write Manufacturing Lead Resume

Manufacturing Lead role is responsible for leadership, training, basic, computer, english, shipping, reporting, manufacturing, design, assembly.
To write great resume for manufacturing lead job, your resume must include:

  • Your contact information
  • Work experience
  • Education
  • Skill listing

Contact Information For Manufacturing Lead Resume

The section contact information is important in your manufacturing lead resume. The recruiter has to be able to contact you ASAP if they like to offer you the job. This is why you need to provide your:

  • First and last name
  • Email
  • Telephone number

Work Experience in Your Manufacturing Lead Resume

The section work experience is an essential part of your manufacturing lead resume. It’s the one thing the recruiter really cares about and pays the most attention to.
This section, however, is not just a list of your previous manufacturing lead responsibilities. It's meant to present you as a wholesome candidate by showcasing your relevant accomplishments and should be tailored specifically to the particular manufacturing lead position you're applying to. The work experience section should be the detailed summary of your latest 3 or 4 positions.

Representative Manufacturing Lead resume experience can include:

  • Speaking: Ability to effectively present information in one-on-one and small group situations
  • B.S. in a Life Sciences discipline and 3 – 8 years of experience OR M.S. in a Life Sciences discipline and 1 – 3 years of experience
  • Computer skills: SAP/Excel
  • Outstanding knowledge of Good Manufacturing Practices (GMPs)
  • Works with Manufacturing Supervisors & Superintendents to prioritize staffing assignments to Operating standards and Net Requirements are met
  • Experience and understanding of SAP or other similar production planning and inventory control systems

Education on a Manufacturing Lead Resume

Make sure to make education a priority on your manufacturing lead resume. If you’ve been working for a few years and have a few solid positions to show, put your education after your manufacturing lead experience. For example, if you have a Ph.D in Neuroscience and a Master's in the same sphere, just list your Ph.D. Besides the doctorate, Master’s degrees go next, followed by Bachelor’s and finally, Associate’s degree.

Additional details to include:

  • School you graduated from
  • Major/ minor
  • Year of graduation
  • Location of school

These are the four additional pieces of information you should mention when listing your education on your resume.

Professional Skills in Manufacturing Lead Resume

When listing skills on your manufacturing lead resume, remember always to be honest about your level of ability. Include the Skills section after experience.

Present the most important skills in your resume, there's a list of typical manufacturing lead skills:

  • Excellent verbal and written communication skills, including ability to effectively communicate with other departments and associates
  • Good English communications skills-(both oral and written)
  • Experience and knowledge of good manufacturing practices, planning and execution
  • Basic mathematical skills (addition/subtraction, multiplication/division)
  • Work with employees to evaluate and develop employee’s skills
  • Effectively communicate all related company safety, quality, delivery, cost, and maintenance topics

List of Typical Experience For a Manufacturing Lead Resume


Experience For Otis Global ERP Manufacturing Lead Resume

  • Training in leadership i.e. communication, resolving conflict, effective listening/ speaking, problems solving, navigating change, team building
  • Related manufacturing experience or training
  • Advanced automation experience using DeltaV, Electronic Batch Management, PLC, etc
  • Responsible for shift to shift operational consistency, prioritization and coordination
  • Excellent computer proficiency (MS Office – Word, Excel and Outlook) and various software applications
  • Experience with chromatography, columns, CIP procedures, TFF, process to purify proteins and antibodies (JIC, IEX, Affinity)

Experience For Manufacturing Lead-flexbumin Resume

  • Experience in a clean and BL2 environment
  • Ensure all employees are trained to operate equipment properly and safely, according to manufacturer’s recommendations
  • Enable effective communication between management and operator
  • Communicate with supply chain if production priorities can not be met
  • Drive performance of team members by promoting a positive work environment emphasizing respect, responsiveness, and results
  • Proficient at reading and writing English
  • Be able to read and use measuring/gauging equipment as required
  • Be available to respond to line clearances, non-conforming product containment and/or other work stoppage issues

Experience For SAP Manufacturing Lead Resume

  • Familiarity with pharmaceutical production equipment including but not limited to centrifuges, filtration systems and CIP/SIP (Clean in Place/Steam in Place)
  • Lean Manufacturing: Knowledge of Elimination of waste, Continuous Improvement, 6S, etc
  • Set up, run and troubleshoot Packaging department assembly line equipment
  • Use material handling equipment such as pallet jacks and forklifts
  • Materials reconciliation during and after runs

Experience For Electronic Manufacturing Lead Technician Resume

  • Assist with organizing storage rooms
  • Maintain communication with warehouse, planners and manufacturing
  • Coordinate employee training to ensure that procedures are followed and meet all quality requirements
  • Sustain and drive lean manufacturing and 5S activities
  • Participate as an active member of the production team and assist in product processing when required
  • Provide facts/data to assist Business Lead in holding people accountable

Experience For Manufacturing Lead Technician Resume

  • Able to work B-shift (evening/nights)
  • Read and interpret documents such as safety rules, operating procedures, and maintenance instructions
  • Work in room temperature to – 20 ºC
  • Sit and/or stand for extended periods - up to four (4) hours at a time
  • Conduct in-process quality control assays to ensure product is within specifications
  • On-the-floor leadership and execution of daily unit operations
  • Help establish daily unit operations schedule that includes people, product, and material flow

Experience For Secure OT / Energy & Manufacturing Lead Resume

  • Monitor process operations to ensure daily TAT and failure rate goals are met
  • Practice safe work habits and comply to Moderna’s safety procedures and guidelines
  • Assigns tasks for manufacturing operations and support associates. Coordinates and performs the set-up and changeover of manufacturing equipment. Verifies component readiness, line clearances, and product returns. Maintains equipment and line cleanliness and compliance (audits)
  • Experience in electronic or similar manufacturing environment
  • Forecast, determine and adjust labor as needed
  • Behave decisively and grasp complex concepts easily
  • Work closely with the Supply Chain Organization to develop weekly and monthly production plans
  • Direct and execute production plans weekly to ensure customer needs are properly met

Experience For Manufacturing Lead Liquid Paint st Shift Resume

  • Maintain accurate production records to support ISO 9001 and product quality standards
  • Coordinate work assignments based on production schedules and material availability, supervise manufacturing associates to ensure safe and secure working environment and drive 6S initiatives
  • Monitor machine efficiencies and report any downtime, malfunction and processes operating below standard to Manufacturing Supervisors & Superintendents or designated individuals for course of action
  • Assist Manufacturing Supervisor and Quality Assurance department non-conforming products documentation, investigation and closure activities
  • ​Assist Manufacturing Supervisor with the daily Labor Reconciliation process, ensuring that all direct labor is accounted for

Experience For Manufacturing Lead-dispensing Resume

  • Follow all safety rules, SOPs, cGMP, work rules and other company policies and initiatives
  • Act as the primary manufacturing personnel to resolve and communicate issues related to safety, quality, compliance and process to the supervisor. Main interface with other departments including maintenance, metrology, engineering and validation
  • Write, revise and review manufacturing related documents as appropriate
  • Initiate and/or coordinate other process improvement projects
  • Act as the primary manufacturing personnel to resolve and communicate issues related to safety, quality, compliance and process to the supervisor.Main interface with other departments including maintenance, metrology, engineering and validation
  • Report all equipment issues to supervisors/managers and maintenance technicians
  • Ensure all products to meet Boulder Brands Quality Standards

Experience For Manufacturing Lead Operator Resume

  • Record/Log all production data accurately and within the time given
  • Motivate employees to improve efficiency and at the same time maintain high quality standards
  • Ensure safety and productivity of all employees to assigned department
  • Assign work to others and assure due dates are met
  • Ensure scrap tickets are completed correctly
  • Troubleshoot equipment failure. Perform equipment first aid (minor equipment repairs) and contact maintenance as required to keep equipment operational
  • Diagnose product defects; instruct employees on repair requirements and work with Product Engineer to trouble shoot product failures
  • Notify Supervisor of required production supply shortages
  • Enforce and practice safety rules

Experience For Oracle EBS Manufacturing Lead Resume

  • Review open orders backlog(SOD) daily and update
  • Responsible for time and work records for department
  • Inspect work center product and tests equipment per industry/customer standards
  • Create job assignments and assist employees with assignments as needed
  • Act as a role model (Lead by Example) o Act as a resource/SME for staff
  • Of the time: Review, prioritization, and execution of daily operations; Coordinate and administer daily interaction between the assigned area of responsibility, across shifts, and all other plant departments

List of Typical Skills For a Manufacturing Lead Resume


Skills For Otis Global ERP Manufacturing Lead Resume

  • Effectively communicate with all employees in a professional manner
  • Manufacturing/engineering experience
  • Experience managing a team of manufacturing floor associates
  • Experience in a manufacturing environment performing mechanical assembly commensurate with level of position
  • Has an understanding of the molding processes at all skill levels
  • GMP (Good Manufacturing Practice’s)
  • Medical device manufacturing or Aerospace experience
  • Lean manufacturing and continuous process improvement experience

Skills For Manufacturing Lead-flexbumin Resume

  • General experience in a production environment filling a supervisory role
  • Strong attention given to following process/ Work Instructions
  • Understands how to operate press according to job specifications
  • Able to relieve and fill-in during lunch breaks and operate press
  • Two years experience in the Liquids department
  • Operate machines as required, fill in for employee shortages
  • Set priorities and timelines
  • Develop and maintain good working relationships through open lines of communication at all levels
  • Responsible for good housekeeping practices

Skills For SAP Manufacturing Lead Resume

  • Experience in a leadership position
  • Strong sense of urgency with the ability to complete tasks quickly and safely
  • Training, coaching and mentoring of junior manufacturing associates
  • Lifting, pulling and carrying up to/in excess of 50 pounds
  • Working with maintenance department to ensure equipment is working and functioning properly-conveyor belts, vacuums and mold release ready
  • Coaching and developing of a team
  • Reaching from shoulder level or below/over shoulder level
  • Notifying supervisors of material counts before counts are too low

Skills For Electronic Manufacturing Lead Technician Resume

  • Ensuring all tools are placed in proper storage after shift
  • Rotating team members
  • Occasional bending/twisting/crouching and squatting
  • Work with Engineering, Production Control, & QA on drawing problems, manufacturing order problems, & quality problems
  • Capable of driving a forklift and operating an overhead crane if needed or in the absence of the forklift operator

Skills For Manufacturing Lead Technician Resume

  • Spot checking packers to make sure they are weighing stone
  • Work closely with support staff such as Technicians, Manufacturing/Quality Engineering, R&D, Value Stream Supervisors Materials/Warehouse to resolve issues
  • Able to learn and understand all quality requirements, including ingredients, formulas and related policies governing the complete production program
  • Work closely with site shipping personnel to ensure labeling compliance for domestic and export orders
  • Provide support to Warehouse Team Lead for daily operations to achieve safe and reliable packaging and shipping activities
  • Serve as back up to the Warehouse Team Lead as necessary to ensure safe and reliable packaging and shipping activities
  • Knowledgeable in shipping, labelling and other aspects of regulatory transportation requirements

Skills For Secure OT / Energy & Manufacturing Lead Resume

  • Practice and enforce housekeeping policies including 5-S Fresh Eyes activities
  • Assist management in coordinating and scheduling the department's day to day operations
  • Moves molding materials from the staging area to the pressline
  • Produce preclinical orders using automated equipment, including HPLC-based chromatography solutions
  • Primary point of contact to assist associates in troubleshooting of bioprocessing equipment
  • Complete knowledge of all aspects of Liquids Packaging
  • Assist in the training of new-hire personnel

Skills For Manufacturing Lead Liquid Paint st Shift Resume

  • Continuously communicate with mill management to assist in planning daily feed production schedules
  • Use of vibrating tools
  • Frequent climbing of ladders/scaffolds/step stools and stairs
  • Ensure that your team is wearing all PPE at all times on the floor
  • Email daily updates regarding production numbers for the day
  • Accountable for the operations occurring in the line(s) assigned
  • Ensure manufacturing processes and procedures adequately meet all necessary ISO9001 and fluid performance specifications
  • Ensure that all Aviation Fluids raw materials and manufacturing supplies are maintained at the necessary service levels

Skills For Manufacturing Lead-dispensing Resume

  • Work closely with site maintenance group to ensure that all production equipment is properly maintained to support manufacturing needs
  • Maintain accurate inventories of finished products, and other managed materials, and adjust quantities monthly for inventory closing activities
  • Work safely in a manufacturing team environment
  • Comply with and enforce all Boulder Brands policies, procedures, and practices and ensure employees are following the same policies and procedures
  • Assist the department supervisor with coordination of work assignments and facilitates daily morning meetings with team
  • Work closely with supervisors and engineering to develop efficient techniques to maximize throughput

Skills For Manufacturing Lead Operator Resume

  • Monitors team members and provides feedback to supervisor relating to job performance
  • Maintain Hour by Hour or production indicating charts and monitors to ensure optimal efficiency of operators
  • Support supervisor by keeping them aware of any problems
  • Sets up press-checking tonnage, cure time, temperature, speed control etc
  • Insures MIP’s are being followed
  • Helps troubleshoot molding of rejected parts
  • Checks production records for job completion and upcoming assignments
  • Assists with material handling between departments as needed
  • Facilitates the training of press operators at all levels

Skills For Oracle EBS Manufacturing Lead Resume

  • Subject matter expert on process and equipment, assisting in the investigation
  • Strict adherence to standard operating procedures and quality documentation
  • Able to give clear instructions and see that they are followed
  • Follow through and obey all company policies and standards as well as detailed instructions from supervisor and manager
  • Complete knowledge of LQD production schedule
  • General knowledge of cGMP’s and applicable agency regulations (such as the FDA, EMEA) to ensure inspection readiness of department
  • Give and receive feedback
  • Solve problems and make informed decisions

List of Typical Responsibilities For a Manufacturing Lead Resume


Responsibilities For Otis Global ERP Manufacturing Lead Resume

  • Experience in Global Enterprise Resource Planning Supply Chain implementations, SAP highly desirable
  • B.S. in Chemistry, Biology, Supply Chain or related scientific/operations area or equivalent and relative work experience
  • Experience in operations, R&D and/or related area
  • Experience in a cGMP environment is highly desired
  • Nitec in Biotechnology / Chemical Process Technology or equivalent with minimally 12 years of relevant experience in the biotechnology, pharmaceutical industry
  • Ensuring that proper storage of chemicals, etc. are done at the end of each work day
  • Of the time: Ensure compliance with administrative and reporting procedures including Kronos timekeeping, time-off requests, and overtime compliance
  • Researches and recommends techniques for solving quality related issues

Responsibilities For Manufacturing Lead-flexbumin Resume

  • Assist in determining the deposition of rework, rejected products and materials from customers and suppliers, and prepares the necessary documentation
  • Maintain optimum floor stock; including Kan-Ban’, inventory levels to ensure the required balance between demand and inventory cycle time is maintained
  • To ensure tooling and equipment is maintained and regularly calibrated where applicable
  • To ensure a safe working environment
  • Shows understanding of the requirements of HR processes and procedures, manages them in the required timescale and positively promotes them across the business

Responsibilities For SAP Manufacturing Lead Resume

  • Assist in quality investigations
  • Lift up to 50 pounds, repeatedly
  • Perform all tasks as assigned
  • Develop a global Enterprise Resource Planning, "Plan to Manufacture? systems design plan and configure solution to enable corporate strategic objective and drive business value
  • Develop, lead, and deliver on promise the Enterprise Resource Planning "Plan to Manufacture? Execution globally to include integrations to other modules globally

Responsibilities For Electronic Manufacturing Lead Technician Resume

  • Of the time: Input data into SAP and review production paperwork. Analyze information and follow-up on errors, exceptions and opportunities. Identify, coordinate and implement opportunities for improvement and accountability in these information flow processes
  • Of the time: Responsible for change management, project execution, and kaizen activities within their assigned area of accountability
  • Of the time: Document maintenance and tooling requests; Follow up with maintenance, tooling and other shifts to ensure the timely and accurate flow of information
  • Serves in a leadership role in the absence of direct supervision
  • Retrieves preforms/extrusions/inserts for job as needed
  • Recommend/Implement process changes/improvements
  • Set up equipment per WEO
  • Of the time: Ensure compliance with established standards and execution of procedures involving employee safety, housekeeping and other plant programs; Use standardized work audit sheets to do daily checks of team members to make sure all associates are following standardized work to surface and fix problems
  • Leading or managing others

Responsibilities For Manufacturing Lead Technician Resume

  • Reasoning: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving variables encountered during the manufacturing process
  • Advanced automation experience using Delta V, Electronic Batch Management, PLC, etc
  • Maintain data charts, metric boards, and other pertinent information
  • Assist in maintaining department compliance with policies, procedures, and standards. This includes training of team personnel for correct interpretation and implementation
  • Acts in place of supervisor when needed but does not issue discipline
  • Actively participate in meetings and serve a as resource in the resolution of problems and issues related to production
  • Support and promote Lean Manufacturing efforts including 5S, execution and adherence to Playbooks where applicable, and explanation of the cell communication board metrics to anyone who inquires

Responsibilities For Secure OT / Energy & Manufacturing Lead Resume

  • Maintain data charts, program metric boards, and other pertinent information
  • Actively participate in program meetings and serve a as resource in the resolution of problems and issues related to production
  • Qualified on at least one operation in a zone
  • Manually place materials into a carton or box on an assembly line
  • Trains entry level personnel
  • Performs more complex and advanced job tasks

Responsibilities For Manufacturing Lead Liquid Paint st Shift Resume

  • Makes sure paperwork is filled out correctly
  • Approves time in Mercury (Kronos)
  • Inspects parts for flaws
  • Records time and work on labor ticket each day
  • Communicates with support departments as necessitated by production needs

Responsibilities For Manufacturing Lead-dispensing Resume

  • Assigns presses as necessary
  • Assists employees as needed
  • Communicates all production/press related information to next shift lead or shift Supervisor
  • Understands LEAN concepts, such as: TAKT, time, capacity measures, etc
  • Fills in for supervisor when needed

Responsibilities For Manufacturing Lead Operator Resume

  • Assists with mold installation as needed
  • Monitor and report usage
  • Read and follow Work Instructions
  • Track record of professional behavior
  • Work with others collaboratively

Responsibilities For Oracle EBS Manufacturing Lead Resume

  • Frequently sit, stand, walk, reach with hands and arm’s length, climb or balance, stoop, kneel, and crouch
  • Regularly lift and/or move up to 10 pounds, occasionally lift and/or move up to 50 pounds
  • Conversion of weights and measures
  • Repetitive motion of finger, wrist, elbow, shoulder or neck movement
  • Occasional forceful hand grasp

Related to Manufacturing Lead Resume Samples

Lead Manufacturing Resume Sample

Work Experience

  •  Complete action items for GMP investigations and CAPA’s   •  Performs application configuration in support of solution delivery initiative   •  Setting up and operating a variety of automatic and semi-automatic machines used in the production of the Company’s product   •&...
Professional Skills

  •  Proven ability or experience in utilizing ...
  •  Audit and Investigation Skills, Report Wri...
  •  Strong decision making skills and accounta...
17 votes

Lead Manufacturing Engineer Resume Sample

Work Experience

  •  Implement process improvements which reduce labor by simplifying tasks (process automation) or speeds the process (increases the number of products produced in a set time frame). Ensure that the safety of all employees is maintained during process changes   •  Reduce product cost by improving on the p...
Professional Skills

  •  Excellent written / oral communication ski...
  •  Strong interpersonal skills and ability to...
  •  Demonstrated problem solving and data driv...
14 votes

Line Lead Resume Sample

Work Experience

  •  Visit Compliance monitoring: Assist RM as directed to review CC Dashboard for compliance for TAT’s and visits for HCBS and NF members for new enrollees and ongoing members and develop innovative approaches to help manage caseloads   •  Act as an advocate for an individual’s care needs by identifying a...
Professional Skills

  •  Strong organizational and planning skills ...
  •  Good problem solving skills and experience...
  •  Demonstrated computer skills (ability to n...
16 votes

Engineer, Manufacturing Process Resume Sample

Work Experience

  •  Participate in new program launches or continuous improvement activities within NACA   •  Support for development and feasibility reviews regarding   •  Design of equipment, tooling and manufacturing process   •  Optimize process and tooling according to capital...
Professional Skills

  •  Strong experience in a similar hands on ro...
  •  Ensure that all tooling, gauging and testi...
  •  Demonstrate a practical understanding of l...
16 votes

Manufacturing Quality Resume Sample

Work Experience

  •  Fosters an environment that promotes Eaton’s goals, philosophies, and encourages continuous improvement through participation and teamwork   •  Well-rounded knowledge in memory product and process in a manufacturing environment   •  Good presentation skills and able to provide high...
Professional Skills

  •  Proven problem solving skills are required
  •  Excellent technical, verbal, written and p...
  •  Strong communication and interpersonal ski...
13 votes

Manufacturing Technical Resume Sample

Work Experience

  •  A relevant post-graduate qualification with 12 months experience in the manufacturing/testing or support of diagnostic products   •  High academic scores: engineering fundamentals and work hard/smart..etc 2 Good at programing/data 3 Good at communication English/Mandarin 4 Be brave and commitment 5 At...
Professional Skills

  •  Support Building 3A cell culture moderniza...
  •  Strong organizational skills and ability t...
  •  Strong organizational skills and ability t...
14 votes
Resume Builder

Create a Resume in Minutes with Professional Resume Templates