Manufacturing Resume Sample

16 votes
Resume Create

The Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Kris Adams
24004 Thiel Ramp,  Phoenix, AZ
+1 (555) 293 6424

Work Experience

Manufacturing Group Leader
06/2017 - PRESENT
Boston, MA
  • Design of manufacturing equipment and fixtures
  • Collaboration with small teams on in-house development of novel and complex manufacturing equipment
  • Specification development for manufacturing equipment
  • Close collaboration with external equipment suppliers on equipment design
  • Coaches and trains CMs on L’Oreal manufacturing process and bulk control
  • Knows and understands L’Oréal guidelines and enforces them
  • Champion full compliance with L’Oreal USA policies and procedures
03/2013 - 01/2017
Detroit, MI
  • Provide reports regarding processes performance as required
  • Able to demonstrate a positive and logical attitude
  • Experience of process engineering within an operations environment
  • Experience managing significant projects
  • Experience of NPI (New Product Introduction)
  • Knowledge of lean manufacturing techniques and six sigma
  • Strong problem solving skills and knowledge of PFMEA
  • Work with staff at differing levels
Junior Manufacturing Engineer
05/2008 - 11/2012
Dallas, TX
  • Operation of manual and automated packaging equipment
  • Using manual or automated systems to gather, record and report on operational and quality metrics
  • Logistics: planning of production, material supply, and the distribution center; optimization of flows and inventory management; improvement of our processes
  • Excellent working environment – safety and ethic is really important for us
  • Inclusion & Diversity - Openness to diversity widens our access to the best talent. Inclusion allows us to engage that talent fully
  • Proactively identify unsafe conditions, and perform thorough Root Cause investigation, with assistance from plant leadership, on all injuries
  • Set expectations for cGMP compliance, including documentation and following established procedure, follow through and monitor that expectations are being met, and give timely, specific feedback, both positive and constructive
  • Responsible for following all required GMP’s and applicable manufacturing procedures
  • Coordination of concerns investigation and root causes analysis


Brown University
2004 - 2008
Engineer's Degree in Engineering

Professional Skills

  • Excellent communication and interpersonal skills. Strong leadership with excellent analytical skills and a good team player
  • Process Management: Knows how to organize people and activities. People management skills. Excellent motivation, teambuilding and people development skills
  • Strong analytical ability and problem solving skills -Effective oral and written communication skills
  • Excellent people handling skills as well as Suppliers and contractors management skills
  • Excellent language skills in English, both written and spoken, are necessary and other major language skills are a merit
  • Excellent interpersonal, written/oral communication skills and teamwork skills
  • Strong written/ verbal communication skills and computer skills

How to write Manufacturing Resume

Manufacturing role is responsible for computer, interpersonal, analytical, technical, leadership, analysis, basic, organizational, manufacturing, customer.
To write great resume for manufacturing job, your resume must include:

  • Your contact information
  • Work experience
  • Education
  • Skill listing

Contact Information For Manufacturing Resume

The section contact information is important in your manufacturing resume. The recruiter has to be able to contact you ASAP if they like to offer you the job. This is why you need to provide your:

  • First and last name
  • Email
  • Telephone number

Work Experience in Your Manufacturing Resume

The section work experience is an essential part of your manufacturing resume. It’s the one thing the recruiter really cares about and pays the most attention to.
This section, however, is not just a list of your previous manufacturing responsibilities. It's meant to present you as a wholesome candidate by showcasing your relevant accomplishments and should be tailored specifically to the particular manufacturing position you're applying to. The work experience section should be the detailed summary of your latest 3 or 4 positions.

Representative Manufacturing resume experience can include:

  • Troubleshooting and Problem Solving Skills: Apply troubleshooting and problem solving skills to resolve issues and/or problems
  • Strong problem solving, multi-tasking, and prioritization skills
  • Advanced computer skills with superior Excel skills to provide data for buying and planning
  • Strong organizational, interpersonal and communication skills coupled with excellent problem solving capabilities
  • Support effective teamwork, participating in and delivering training, sharing knowledge and skills with colleagues and maintaining process documentation
  • Experience working in a fast paced and dynamic manufacturing environmental utilizing analytical skills to plan and buy for a large supply chain

Education on a Manufacturing Resume

Make sure to make education a priority on your manufacturing resume. If you’ve been working for a few years and have a few solid positions to show, put your education after your manufacturing experience. For example, if you have a Ph.D in Neuroscience and a Master's in the same sphere, just list your Ph.D. Besides the doctorate, Master’s degrees go next, followed by Bachelor’s and finally, Associate’s degree.

Additional details to include:

  • School you graduated from
  • Major/ minor
  • Year of graduation
  • Location of school

These are the four additional pieces of information you should mention when listing your education on your resume.

Professional Skills in Manufacturing Resume

When listing skills on your manufacturing resume, remember always to be honest about your level of ability. Include the Skills section after experience.

Present the most important skills in your resume, there's a list of typical manufacturing skills:

  • Knowledge of basic math, strong leadership and interpersonal skills and the capability to effectively employ advanced computer skills
  • Strong computer skills, including MS Office Suite, Visio, CAD competency utilizing SolidWorks 2010 or later experience required
  • Decision Quality: Makes good decisions based upon a mixture of analysis, experience, and judgment. Strategic Agility, strong analytical and conceptual skills
  • Good organisation skills, numerical and reasoning skills
  • Good written and oral communication skills, PC and analytical skills
  • Excellent organizational skills with the ability to effectively handle multiple tasks

List of Typical Experience For a Manufacturing Resume


Experience For Junior Manufacturing Engineer Resume

  • Strong presence with effective influencing and interpersonal skills
  • Basic computer skills; Mechanical and Electrical troubleshooting skills; Technical aptitude
  • Communication - Communicates effectively with others using both oral and written communication skills
  • Proven Leadership skills with the demonstrated ability to be a role model for desired Zimmer behaviors
  • Strong work ethic and team-oriented focus with excellent interpersonal communication skills required
  • Have excellent communication and presentation skills and at least good English-knowledge (written and spoken)

Experience For Manufacturing Group Leader Resume

  • Outstanding analytical, conceptual and implementation skills; initiative, persuasive and a strong team spirit
  • Prior internship / co-op experience in manufacturing OR 1-2 years of professional work experience in manufacturing
  • Strong project management, communication, influencing and networking skills
  •  Excellent trouble shooting and problem solving skills
  • Excellent programming skills with C++, C# or Java
  • Experience using ERP/MRP systems with the skills to review Bills of Materials, inventory quantities and locations, and other component information
  • Good analytical and problem-solving skills and capability to translate customer needs into different technical solutions
  • Strong organizational and project management skills and an analytical approach to problem-solving
  • Demonstrate good understanding of and experience in compressed air systems, chillers, turbines, boilers, RO, sea water/process water/waste water systems

Experience For Manufacturing Controller Resume

  • Demonstrated technical and professional skills in manufacturing
  • Excellent problem solving skills in a hands-on environment
  •  Excellent coaching and people management skills
  • Proven practical background of applying process, operational, mechanical skills to help solve production and equipment related losses
  • Provides input to design, technical staff, briefs management, and participates effectively in a team of moderately experienced professional staff
  • Strong communication skills required to work across many different areas of the organization

Experience For Manufacturing Controls Engineer Resume

  • Computer skills including SAP or experience with a similar ERP-system
  • Exceptional interpersonal skills with experience in developing direct reports
  • Skills to analyze big amount of data, convert it into usable Business information to prioritize projects
  • Maintain and demonstrate superior interpersonal written and oral skills in daily relations with the subcontractor
  • Coaching and command skills for directing and developing sub ordinates and team spirit

Experience For Manufacturing Engineer Technician Resume

  • Planning, Problem Solving, Functional/Technical Skills, Action-oriented, Focus on self-development, Agility
  • Manufacturing production experience; Previous experience in a food / pharmaceuticals manufacturing environment
  • Computering skills in CAD/Space Vision and Office pack
  • Looking for individuals with a good work ethic, good attendance and flexible to learn various jobs
  • Implementing the skills of the line crews through trainings on technical standards and restoration of basic conditions (Stability and Sustainability)
  • Display skills in manufacturing processes, including operating, maintaining and cleaning automated equipment

Experience For Manufacturing Accountant Resume

  • Implement process improvement/development utilizing the Achieving Competitive Excellence (ACE) operating system and skills training
  • Proven experience in fast-paced, high volume and high demand working environment where multi-tasking was required while leading people
  • Demonstrated professional experience providing engineering and manufacturing support for the production of large gears and superstructures
  • Basic computer skills to enable recording of production, completing labels and printing
  • Veneer peeling and drying experience or other wood products manufacturing experience
  • Experience using CAD/CAM systems utilizing solid modeling
  • Contribute effectively to building and sustaining a collaborative environment, promoting commitment to achieve business goals

Experience For Manufacturing Excellence Manager Resume

  • Prior experience working in a similar manufacturing setting
  • Lead process development and process validation activities, including master validation planning, IQ/OQ/PQ protocol development, and reporting of results
  • Proven Purchasing or Buying experience
  • Technician skills and abilities of electrical & mechanical assembly / disassembly / troubleshooting / repair / testing
  • Fundamental troubleshooting skills involving electrical design and system analysis
  • Demonstrated problem solving knowledge and experience in manufacturing environment
  • Basic reading, writing, and math skills (add, subtract, multiply with percentages)
  • Prior experience with capital equipment justification, project scheduling and project planning

Experience For Manufacturing Program Manager Resume

  • Recombinant Manufacturing Experience and Experience in Aseptic fill Finishing
  • Have a strong knowledge and understanding of Good Manufacturing Practices
  • PC skills& knowledge of Manufacturing Engineering Software
  • Experience in working in a Microbiology laboratory and ideally experience in a manufacturing environment
  • PLC/IPC skills: Proficiency in programming, troubleshooting, and installation of PLC/IPC controls
  • Critical thinking with exceptional problem-solving skills, able to work independently and in team environments

Experience For Head of Manufacturing Resume

  • Experience of procuring goods required in a manufacturing process
  • Technical skills desired for building web services interfaces using Microsoft Web API and follow industry standards such as REST, JSON and XML
  • Experience in coating and drying roll goods in web line applications
  • Prior experience working in and with various manufacturing roles such as quality control, maintenance and operations
  • Demonstrated ability to manage changing priorities and drive projects to completion with high quality and attention to detail
  • Develop and coordinate projects utilizing basic project management and structured project management skills
  • Intermediate MS Office skills, including ability to open and create files in Word, create and manipulate data in Excel and use E-mail and calendars in Outlook

Experience For Experienced Manufacturing Engineer Resume

  • Proven experience in a management role with at least 10 of those within a fast paced, large volume regulated manufacturing environment
  • +10 years’ relevant experience in accounting / finance field, with previous managerial experience
  • Prior manufacturing experience
  • Computer skills, including Excel, Word, and Oracle
  • Superior problem solving and analytical skills (quantitative and qualitative)

List of Typical Skills For a Manufacturing Resume


Skills For Junior Manufacturing Engineer Resume

  • Demonstrated business communication skills (both verbal and written) with the ability to communicate effectively over the phone
  • Strong background, knowledge and proven skills in management accounting, cost and inventory accounting, GAAP, MS Excel, ERP/MRP systems, and sales tax
  • Excellent interpersonal skills required for inter-departmental and team interaction; experience with direct interaction with manufacturing/production personnel
  • PC based operating system and hardware experience & good computer skills
  • Strong computer skills, Microsoft office, AutoCAD or Solidworks, MRP
  • Strong SAP / R3 and Business Warehouse skills are strongly desired
  • Experienced in Root Cause Analysis – Proven Loss Elimination skills
  • Effective organizational skills with successful prioritization and planning of tasks
  • Demonstrate good writing and interpersonal skills

Skills For Manufacturing Group Leader Resume

  • Excellent organization skills. Ability to handle multiple priorities
  • Proven leadership skills particularly in, creating possibilities, change management, consistently delivering great performance and managing people for success
  • Good planning, analyzing and problem solving skills
  • Minimize production downtime using effective and efficient multi-craft, troubleshooting and repair skills
  • Effectively juggle competing priorities in a fast-paced, high-volume manufacturing work environment
  • Strong problem solving and analytical skills; familiarity of problem solving tools and resources (FMEA, Pareto, Cause & Effect diagrams)

Skills For Manufacturing Controller Resume

  • Good computer skills as MS office including word, excel, power point etc
  • Strong PC skills, including proficiency in Excel, Word, and PowerPoint,
  • Excellent verbal and written interpersonal skills, including ability to present technical issues and project statuses at the Management level
  • Strong analytical and financial analysis skills with an aptitude for simplifying complicated analysis for key decision makers
  • Excellent communication skills with a wide range of target audiences consisting of Executive Leadership, Plant Leadership, and peers
  • Prior work experience or internship experience in a manufacturing\machine shop environment

Skills For Manufacturing Controls Engineer Resume

  • Strong technical skills regarding inventory management, reconciliation and cost analysis
  • Thorough knowledge of manufacturing concepts\Good written and oral communication skills
  • Strong analytical skills are required to quickly grasp issues impacting the plants' financial results
  • Excellent computer skills with working knowledge of ProE & Auto Cad
  • Good analytical, problem solving, and root-cause analysis skills

Skills For Manufacturing Engineer Technician Resume

  • Strong time management skills with the ability to successfully perform within a project framework including defined deliverables and time frames
  • Strong technical writing skills and ability to generate technical documents semi-independently
  • Excellent verbal and written communication skills, including ability to present technical issues and project statuses at the Management level
  • Possess strong technical, leadership and problem-solving skills
  • Keep and maintain accurate records and data, operate a computer keyboard to input and access data, and analyze data and apply basic skills in statistics
  • Excellent accounting analysis and research skills

Skills For Manufacturing Accountant Resume

  • Proficient with a computer, good data entry skills
  • Strong verbal and electronic communication skills
  • Good computer skills and proficient with MS Office, particularly Excel
  • Effectively utilize appropriate ERP system and miscellaneous software to drive process efficiencies, lower service delivery cost and increase effectiveness
  • Strong technical and analytical skill with solid financial, general and cost accounting background in a manufacturing and distribution environment
  • Good communication skills, teamwork abilities and initiative
  • Strong change management and communication skills
  • Strong time-management skills, able to manage projects whilst supporting manufacturing processes

Skills For Manufacturing Excellence Manager Resume

  • Friendly and approachable individual, with good communication skills
  • Good computer and basic office software skills
  • Highly effective communication and interpersonal skills are required
  • Multi-tasking skills demonstrating excellent attention to detail
  • Organise and prioritise your own workload effectively whilst managing competing demands
  • Skilled at using a computer with prior experience using the Internet, Technical Systems Platforms, Main Frame Systems and Programs and Microsoft Office tools
  • Possess broad based technical skills, as well as, planning, organizing, and people development with at least 5 years of technical and plant experience
  • Good decision making skills – Team orientated
  • Good presentation and meeting management skills at all levels

Skills For Manufacturing Program Manager Resume

  • Good communication skills (understanding expectations)
  • Strong computer skills, including Word, Excel, MS Project and Outlook
  • Strong technical and broad business knowledge & program or project management skills
  • Possess excellent data analysis and collection skills
  • Good computer skills & knowledge of Microsoft Excel
  • Good verbal and written skills for exchange of information in a clear and concise manner
  • Experience or equivalent knowledge and skills, necessary to satisfactory perform the position
  • Excellent computer skills: Word, Excel, SAP, Outlook, OSI PI

Skills For Head of Manufacturing Resume

  • Direct operational experience and knowledge of the make part of business with proven line management experience
  • Excellent inspection and accurate documentation skills
  • Proven self-starter and fast learner with established computer skills
  • Basic computer skills and the ability to operate computer terminals and general software applications
  • Interface with professional associations, suppliers, IPTs and internal customers to develop products, skills, knowledge and experience

Skills For Experienced Manufacturing Engineer Resume

  • Strong mechanical aptitude and troubleshooting skills
  • Good typing and grammar skills
  • Demonstrate good understanding and experience on compressed air systems, chillers, turbines, boilers, RO, sea water, process water and waste water systems
  • Good communication, both verbal and written, and influencing skills
  • Demonstrated ability to interact effectively as a team player
  • Solid, demonstrated experience in implementing world class tools and lean manufacturing techniques and managing plant wide change initiatives

List of Typical Responsibilities For a Manufacturing Resume


Responsibilities For Junior Manufacturing Engineer Resume

  • Multi-Tasking: Manage multiple incoming priorities effectively
  • Strong ERP and budgeting/reporting systems skills
  • Influence by having strong interpersonal skills
  • Proven technical and practical application skills
  • Interface with internal customers to develop products, skills, knowledge and experience

Responsibilities For Manufacturing Group Leader Resume

  • Experience with RS232, USB, Ethernet, CPLDs, microcontrollers, etc. Experienced in Electrical Autocad & SolidWorks
  • Strong system skills and aptitude
  • Communicating effectively with managers, supervisors and employees
  • Manufacturing engineering work-related experience, including CNC Machining Programming experience for New Product Introduction
  • Be capable of learning and qualifying on multiple skills for operating and maintaining automated equipment, computer systems, or product distribution systems
  • 3D solid modeling, and/or 3D printing/Additive Manufacturing experience
  • Effectively monitoring Kanban and spot orders and maintaining appropriate paperwork/charts
  • Strong attention to detail and experience with managing project documents and producing quality content

Responsibilities For Manufacturing Controller Resume

  • Partner with Human Resources to effectively and efficiently manage and administrate the collective bargaining agreement
  • Demonstrates good knowledge and understanding of GMP
  • Effectively Review Daily Labor reporting
  • Experience with Computer Aided Design (CAD) and solid modeling – PTC Creo or equivalent
  • Experience in a manufacturing / cleanroom environment or a combination of education and experience required
  • Skills include Microsoft Excel, problem solving, cost analysis, communication, observation

Responsibilities For Manufacturing Controls Engineer Resume

  • Experience in previous consulting experience
  • Proven experience within production engineering role
  • Product Assembly & Packing or similar transferable skills
  • Prior US Government contracting experience desired but not mandatory
  • Communicates clearly and effectively both verbally and in writing
  • Advanced skills in Excel including macro development
  • Robust planning and organizational skills

Responsibilities For Manufacturing Engineer Technician Resume

  • Prior supervisory experience in accounting capacity
  • Experienced in testing and validation of new materials/processes
  • Solid experience from manufacturing, preferably as Production or Continuous Improvement/Lean Manager
  • Lean Manufacturing and Six Sigma knowledge or experience is strongly desired
  • Have at least 6 months prior manufacturing experience
  • Proficient in the use of Microsoft Office, including Word, Excel, Outlook, Minitab and Project Management Skills
  • Strong IT aptitude to deliver effective reporting, analysis and presentations
  • Effectively develop and transfer knowledge down into, and across, the financial and manufacturing organizations

Responsibilities For Manufacturing Accountant Resume

  • Effectively manage multiple direct reports, projects and tasks while adhering to guidelines and deadlines
  • Experience of working within proven development methodologies (Agile, Waterfall and/or APQP desirable)
  • Analytical skills with regard to Geometric Dimensioning & Tolerance as it related to, form fit, and function
  • Proven experience in people management of a large workforce
  • Negotiation skills are desirable
  • Experience using AutoCAD/Autodesk Inventor, Solid works or Pro-E
  • Basic mechanical skills and the ability to perform basic and repetitive assembly operations as required

Responsibilities For Manufacturing Excellence Manager Resume

  • Draw upon experience and professional skepticism to quickly identify issues and develop effective courses of action
  • Advanced financial analysis and quantitative skills
  • Identify opportunities to more effectively analyze and report on metrics and trends
  • Manages multiple concurrent projects with several suppliers to be delivered cost effectively, producing high Quality products and under a committed timeline
  • Act independently, resourcefully and effectively in a team environment
  • Determining operation sequence, layout work, devise own setups and operate wide variety of machine tools, such as vapor honing and laser etching equipment
  • Manufacturing project experience - leading projects from conception to manufacturing release

Responsibilities For Manufacturing Program Manager Resume

  • Establishing and maintaining good working relationships both internally and externally
  • Willing adherence to good manufacturing requirements including the removal of all jewelry, piercings, false nails, nail polish, false eyelashes etc
  • Working with Suppliers and Vendors to develop safe, efficient and cost effective Machining / Reclaim / Assembly systems to produce quality products
  • Understanding of the principles of good manufacturing practice
  • Leading the Signify Electronics Plan to Finished Goods program with prime focus on manufacturing, quality and internal logistics
  • Manufacturing with cost accounting and inventory management experience is required
  • Printing work order paperwork and assigning priorities based on customer demand
  • Working knowledge of and experience with fixed assets, general ledger, A/R, A/P

Responsibilities For Head of Manufacturing Resume

  • Working closely together with local HR to assure a trustful and good relationship with the work council
  • Working experience of min.2 years in similar position
  • Manufacturing experience in wire and cable
  • Working experience with FDA regulated, ISO13485, or other highly regulated environments
  • Supporting the production in terms of equipment validation , process , etc

Responsibilities For Experienced Manufacturing Engineer Resume

  • Packaging Industry experience
  • Engineering/Process experience required
  • Programming notions (VB, C, ...) and robotics experience are an asset
  • Programming experience with Teststand and/or Labview
  • Programming experience – LabVIEW, Visual Basic, Access, C++
  • Understanding of circuit schematics and strong fundamental of electronics

Related to Manufacturing Resume Samples

Manufacturing Maintenance Resume Sample

Work Experience

  •  Supervise the Maintenance function and ensure that maintenance assignments are carried out in an efficient and safe manner. Perform audits of in-process and closed work orders. Supervisor maintenance staff   •  Set-up, maintain and be responsible for preventative maintenance systems, inspection routin...
Professional Skills

  •  Manufacturing experience; strong hydraulic...
  •  Strong leadership skills with proven abili...
  •  Demonstrated verbal and written communicat...
13 votes

Manufacturing Planner Resume Sample

Work Experience

  •  Proficient usage and understanding of Microsoft Office Suite, including Excel, Excel Macros and PowerPoint   •  Support Manufacturing production plan to support Operations requirements   •  Identify and resolve bottlenecks and routines issues   •  Maintain both ...
Professional Skills

  •  Demonstrate strong analytical, technical, ...
  •  Excellent verbal/written communication ski...
  •  Strong verbal communication skills to effe...
16 votes

Manufacturing Technical Resume Sample

Work Experience

  •  A relevant post-graduate qualification with 12 months experience in the manufacturing/testing or support of diagnostic products   •  High academic scores: engineering fundamentals and work hard/smart..etc 2 Good at programing/data 3 Good at communication English/Mandarin 4 Be brave and commitment 5 At...
Professional Skills

  •  Support Building 3A cell culture moderniza...
  •  Strong organizational skills and ability t...
  •  Strong organizational skills and ability t...
14 votes

Engineer, Manufacturing Process Resume Sample

Work Experience

  •  Participate in new program launches or continuous improvement activities within NACA   •  Support for development and feasibility reviews regarding   •  Design of equipment, tooling and manufacturing process   •  Optimize process and tooling according to capital...
Professional Skills

  •  Strong experience in a similar hands on ro...
  •  Ensure that all tooling, gauging and testi...
  •  Demonstrate a practical understanding of l...
16 votes

Manufacturing Quality Resume Sample

Work Experience

  •  Fosters an environment that promotes Eaton’s goals, philosophies, and encourages continuous improvement through participation and teamwork   •  Well-rounded knowledge in memory product and process in a manufacturing environment   •  Good presentation skills and able to provide high...
Professional Skills

  •  Proven problem solving skills are required
  •  Excellent technical, verbal, written and p...
  •  Strong communication and interpersonal ski...
13 votes

Manufacturing Technical Resume Sample

Work Experience

  •  A relevant post-graduate qualification with 12 months experience in the manufacturing/testing or support of diagnostic products   •  High academic scores: engineering fundamentals and work hard/smart..etc 2 Good at programing/data 3 Good at communication English/Mandarin 4 Be brave and commitment 5 At...
Professional Skills

  •  Support Building 3A cell culture moderniza...
  •  Strong organizational skills and ability t...
  •  Strong organizational skills and ability t...
14 votes
Resume Builder

Create a Resume in Minutes with Professional Resume Templates